Close
Main Categories
    Filters
    Preferences
    Search

    1/2" Churro, Black 3 FT /- 0.125" (am-3101-3_Black)

    Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

    The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

    Specifications:

    • Material: 6005A Aluminum
    • Inside diameter: 0.231 in.
    • Outside width: 0.495 in. Hex, across flats
    • Length: Selectable Above
    • Weight: 0.16 lbs/ft
    MFR Part #: AM-3101-3_BLACK
    $25.00
    Availability: Out of Stock - on backorder and will be dispatched once in stock.
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    10-32 Nylock Nut

    #am-1042
    $0.08
    (In stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    1/4-20 x 7/16 Tee Nut

    #am-1079
    $0.27

    Tee nuts are used to put steel threads into wood. Drill a hole sized to fit the barrel, then hammer in the locking prongs until the top of the tee nut is flush with the surface. This creates a strong fastening method between wooden components and other components.

    Split Collar Clamp 1/2 in. Hex HD

    #am-1526
    $5.50
    (186 In stock)

    This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (87 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    #45423
    $22.23

    The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Bumper Wood Corner Bracket

    #am-3233
    $12.00
    (In stock)

    The Bumper Wood Corner Bracket is designed to connect two plywood planks together to form a strong 90 degree bumper corner.

     

    Specifications

    • Material: 5052 Aluminum

    Documents

    Layout Print(s)

    am-3233 AM14U3 Bumper Outside Corner Bracket.PDF

    CAD File(s)

    am-3233 AM14U3 Bumper Corner Bracket.STEP