2 in. Stealth Wheel, 1/2 in. Hex Bore, 60A Durometer

CAD File(s)

am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

MFR Part #: am-3155_blk

$9.00

Availability: 45 in stock

Qty:

Reviews

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Also Purchased

0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

#am-3876

$2.75

This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it.

Specifications

Inside Diameter: 0.192 in.
Length: 1 in.
Material: Aluminum
Outside Diameter: 0.375 in.
Wall Thickness: 0.09 in.

2" Stealth Wheel, 1/2" Hex Bore, 35A, Green, Durometer (am-3155_green)

#am-3155_green

$9.00

(72 In stock)

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 2 in., 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, Polycarbonate
Weight: 0.23lb, 0.1lb
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

Falcon 500 Spline to 1/2 in. Hex Shaft Adapter

#am-4187

$11.50

(6 In stock)

These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. This product includes the correct size washers to retain items along the hex shaft, as well as a thread-patch 8-32 screw to be used in conjunction with spacers included with the Falcon 500 motor to retain motion hardware.

Ultra Flexible Wire -12 AWG

#am-4195-25

$79.00

These 10 and 12 gauge silicone wire are the best things to happen to robot wiring! Both gauges offer high strand count in a flexible sheathing. This wire allows for tight turns in small spaces, allowing you to achieve cleanliness unlike anything seen before. This is the wiring you need to achieve satisfyingly clean robot wiring, like what FRC Team 1538 achieves every year, but it's also perfect for wire runs that have to move with mechanisms on your robot.

Each product on this page is a pack of 25 feet of red wire and 25 feet of black wire. Each color is separate but packaged together. This is not "zip cord" like our lower strand count wire.

Specifications

Color: Black and Red
Diameter: 0.18 in., 0.22 in.
Gauge: 10, 12
Insulation: Silicone Rubber
Length: 25 Feet of Each Color
Maximum Voltage: 600V
Strand Count: 650+, 1000+
Temperature Rating: -60 to 200 Celcius

2 x 1 x 0.063 Aluminum Box Extrusion, 6ft

#am-3214-6

$49.00

(17 In stock)

This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction.

Specifications:

Length: 72" (+/- 1")
Wall Thickness: 0.062"
Exterior Corners: Sharp
Material: 6061-T6 Aluminum
Weight: 2.4 Pounds

Timing Belt, 45 Tooth, Gates 5mm HTD, 9mm wide

#am-3273

$15.00

(0 In stock)

Specifications:

Number of Teeth: 45
Pitch Length: 8.86 inches (225mm)
Pitch: 5mm
Width: 9mm
Tooth profile: 5mm pitch HTD
Weight: 0.1

2" Stealth Wheel, 1/2" Hex Bore, 50A Durometer

#am-3155_Blue

$9.00

(87 In stock)

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 2 in., 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, Polycarbonate
Weight: 0.23lb, 0.1lb
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

1/2" Churro, 6 FT +/- 0.125" (am-3101-6)

#AM-3101-6

$34.00

(12 In stock)

Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket.

The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

Specifications:

Material: 6005A Aluminum
Inside diameter: 0.231 in.
Outside width: 0.495 in. Hex, across flats
Length: Selectable Above
Weight: 0.16 lbs/ft

Customers who bought this item also bought

0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

#am-3876

$2.75

This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it.

Specifications

Inside Diameter: 0.192 in.
Length: 1 in.
Material: Aluminum
Outside Diameter: 0.375 in.
Wall Thickness: 0.09 in.

2" Stealth Wheel, 1/2" Hex Bore, 35A, Green, Durometer (am-3155_green)

#am-3155_green

$9.00

(72 In stock)

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 2 in., 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, Polycarbonate
Weight: 0.23lb, 0.1lb
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP