Close
Menu
Main Categories
    (0) Quote
    You have no items in your shopping cart.
    (0) Items
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    Prev288mm Flat Beam (2 pack)
    Next336mm Flat Beam

    288mm Square Beam

    Be the first to review this product

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 288mm
    • Step File

     

    MFR Part #: 76103
    $11.10
    Availability: 1597 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Also Purchased

    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of 192mm Low Profile U-Channel

    192mm Low Profile U-Channel

    #76030
    $9.71
    (658 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 192mm
    • Hole pattern - 4
    • Step File

     

    Picture of Motor Mount Plate Leaf

    Motor Mount Plate Leaf

    #76139
    $6.93
    (849 In stock)
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1610 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of 192mm U-Channel

    192mm U-Channel

    #76015
    $11.10
    (221 In stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 192mm
    • Hole pattern - 4
    • Step File
    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1741 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of Servo Arm Extended

    Servo Arm Extended

    #76150
    $8.32
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File
    Picture of Servo Standard Front

    Servo Standard Front

    #76144
    $6.24
    (1218 In stock)

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6.93
    (1238 In stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    Customers who bought this item also bought
    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of 192mm Low Profile U-Channel

    192mm Low Profile U-Channel

    #76030
    $9.71
    (658 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 192mm
    • Hole pattern - 4
    • Step File

     

    Picture of Motor Mount Plate Leaf

    Motor Mount Plate Leaf

    #76139
    $6.93
    (849 In stock)
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1610 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of 192mm U-Channel

    192mm U-Channel

    #76015
    $11.10
    (221 In stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 192mm
    • Hole pattern - 4
    • Step File
    Related products
    Picture of 432mm Square Beam

    432mm Square Beam

    #76100
    $16.66
    (694 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 432mm
    • Step File

     

    Picture of 384mm Square Beam

    384mm Square Beam

    #76101
    $13.88
    (594 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 384mm
    • Step File

     

    Picture of 336mm Square Beam

    336mm Square Beam

    #76102
    $11.79
    (615 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 336mm
    • Step File

     

    Picture of 240mm Square Beam

    240mm Square Beam

    #76104
    $9.71
    (582 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 240mm
    • Step File

     

    Picture of 192mm Square Beam

    192mm Square Beam

    #76105
    $9.02
    (1196 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 192mm
    • Step File
    Picture of 144mm Square Beam

    144mm Square Beam

    #76106
    $6.51
    (1230 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 144mm
      • <
    • Step File

     

    Picture of 96mm Square Beam

    96mm Square Beam

    #76107
    $5.54
    (1107 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 96mm
    • Step File

     

    Picture of 48mm Square Beam

    48mm Square Beam

    #76108
    $3.46
    (492 In stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 48mm
    • Step File

     

    Information
    Customer service
    My account
    Contact Info
    Copyright © 2024 Studica Limited. All rights reserved.