Close
Main Categories
    Filters
    Preferences
    Search

    2" Compliant Wheel, 3/8 inch Hex, 35 Durometer Green

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    MFR Part #: am-3571_green
    $8.00
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $14.50
    (43 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    2" Compliant Wheel, 3/8 inch Hex, 50 Durometer Blue

    #am-3571_blue
    $8.00
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

     

    4" Compliant Wheel, 1/2" Hex Bore, 50A Durometer, Blue

    #am-3480_blue
    $14.50
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 1/2" Hex Bore, 60A Durometer, Black

    #am-3480_black
    $14.50
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    574 ml Air Reservoir with Push Connect Fittings

    #am-2649
    $30.00
    (20 In stock)

    This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

    This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

    Specifications:

    • Manufacturer: Clippard
    • Weight: 0.64 lbs
    • Capacity: 574 ml (35 cu. inch)
    • Ports: Two 1/4" od tube push-in fittings
    • Maximum pressure: 125 psig
    • Temperature rating: 35 to 100 F
    • Length: 12.25"
    • Diameter: 2.5" (@ main tank), 2.75" max


    A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

    Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).