3/8 in. Push On Retaining Ring

This retainer clip is used to hold objects (such as gears) in place on shafts. 

Example: This product can be used to hold a gear onto a CIM motor shaft. 

Specification: 

• Material: Steel
• Inner Diameter: 8mm
• Outer Diameter: 15mm
• Weight: Less than 0.001 lbs

This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. 

Product Overview:

• Inner Diameter: for 6mm D Shaft
• Outer Diameter: 0.437 in.
• Weight: 0.0005 Pounds

This external retaining ring is used to fit into a groove on a 3/4" shaft. 

External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. 

Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore.

Specification: 

• Material: Steel
• For Shaft Diameter: 3/4"
• Specification: ASME B18.27.1
• Thickness: 0.042"
• Type: External Retaining Ring
• Free Inside Diameter: 0.693"
• Lug Height: 0.136"
• Section Width Maximum/Minimum: 0.092/0.051"
• Groove Diameter: 0.704"
• Groove Width: 0.046"
• Groove Depth: 0.023"
• Plier Hole Diameter: 0.052"
• Weight: 0.002 pound

3/16" x 3/4" spring pin. Used in the WormBox gearbox.

Specifications:

• Material: spring steel
• Diameter: 3/16"
• Length: 3/4"
• Weight: 0.001 pounds

Specifications:

• Material: Steel with Black Phosphate Coating
• Thickness: 0.035 inch
• Free Inside Diameter: 0.300"
• Free Outside Diameter: 0.660"
• Groove Depth: 0.036"
• Groove Diameter: 0.303"
• Groove Width: 0.039"
• Shaft Diameter: 3/8"

1/2 inch external retaining ring, used in the RAW Box. 

Specifications: 

• Material: Steel
• For Shaft Diameter: 1/2"
• Thickness: 0.031"
• Type: External Retaining Ring
• Free Inside Diameter: 0.456"
• Plier Hole Diameter: 0.40"
• Weight: 0.002 pounds

This gear can be used on the any of the PG Series Gearmotors, fitting on the 10mm output shaft. 

Specifications:

• Number of Teeth: 16
• Diametral Pitch: 20
• Pitch Diameter: 0.8"
• Pressure Angle: 14.5 Degrees
• Pitch Diameter: 0.8"
• Face Width: 0.55"
• Overall Width: 0.58"
• Bore: 10mm (0.395") diameter hole w/ 4mm (0.158") keyway
• Material: 4140 steel, cold formed into gear teeth
• Weight: 0.08 Pounds

#25 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #25
• Pitch: 0.250 inch
• Weight: 0.01 lbs

#35 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs