Close
Main Categories
    Filters
    Preferences
    Search

    3/8 in. Flat Washer

    Washers are typically used distribute a fastener load over a wider area so components that are being held together are not damaged. This washer has a 0.406 inch inside diameter, 0.812 inch outside diameter, and 0.06 inch thickness.

     

    Specifications

    • Finish: Zinc
    • Inside Diameter: 0.406 in.
    • Material: Steel
    • Outside Diameter: 0.812 in.
    • Thickness: 0.062 in.
    MFR Part #: am-1393
    $0.25
    This product has a minimum quantity of 25
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    3/8-16 Nylock Nut

    #am-1054
    $0.31
    (In stock)

    Specifications:

    • Material: Steel, zinc plate
    • Hex Width: 9/16 in.
    • Thickness: 0.45 in.
    • Weight: 0.018 pounds

    10-32 x 0.75 in. Socket Head Cap Screw - Min 25

    #am-1047
    $0.29
    (In stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: 10-32
    • Length: 3/4"
    • Head: Socket Head Cap Screw

    10-32 x 0.5 in. Socket Head Cap Screw

    #am-1002
    $0.35

    This item can only be purchased in multiples of 25

     

    #10-32 x 0.5 in. long Socket Head Cap Screw

     

    Specifications

    • Finish: Zinc
    • Head: Socket Cap
    • Length: 0.5 in.
    • Material: Steel
    • Thread: 10-32
    • Weight: 0.1 lbs

    3/8-16 x 3.5" Hex Bolt

    #am-1122
    $2.75
    (In stock)

    3/8-16 x 3.5 inch long Hex Head Bolt 

    Specifications:

    • Material: steel, with zinc plating
    • Length: 3.5 inches under the head
    • Thread: 3/8-16
    • Hex width: 9/16 inch
    • Weight: 0.116 pounds
    • Grade 5

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (96 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    1 in. 60 Degree Gusset

    #am-4162
    $5.00

    We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.

     

    On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.

     

    Specifications

    • Hole Pattern: Plates feature 0.20 in. Holes on a 1 in. Center to Center Spacing
    • Material: 6061-T6 Aluminum
    • Thickness: 0.125 in

     

    Documents

     

    Layout Print(s)

    am-3860 90 Gusset REV2.PDF

    am-4158 1IN Tee Gusset.PDF

    am-4159 1IN Quad Gusset.PDF

    am-4160 1IN 30deg Gusset.PDF

    am-4161 1in 45deg Gusset.PDF

    am-4162 1in 60deg Gusset.PDF

    am-4163 1in 120deg Gusset.PDF

    am-4164 1in 135deg Gusset.PDF

    am-4165 1in 150deg Gusset.PDF

    am-4166 1IN Sport Double Bearing Mount.PDF

    am-4167 1IN 57Sport Side Mount Gusset.PDF

    am-4168 1IN Bearing Side Mount Gusset.PDF

     

    CAD File(s)

    am-3860 90 Gusset REV2.STEP

    am-4158 1IN Tee Gusset.STEP

    am-4159 1IN Quad Gusset.STEP

    am-4160 1IN 30deg Gusset.STEP

    am-4161 1in 45deg Gusset.STEP

    am-4162 1in 60deg Gusset.STEP

    am-4163 1in 120deg Gusset.STEP

    am-4164 1in 135deg Gusset.STEP

    am-4165 1in 150deg Gusset.STEP

    am-4166 1IN Sport Double Bearing Mount.STEP

    am-4167 1IN 57Sport Side Mount Gusset.STEP

    am-4168 1IN Bearing Side Mount Gusset.STEP