Close
Main Categories
    Filters
    Preferences
    Search

    4:1 Sport Add-on Stage

    This accessory for blue Sport gearboxes is an easy-to-use device that adds an extra 4:1 overall ratio to the input of any blue Sport gearbox.

    MFR Part #: am-4198
    $48.14
    Availability: In stock

    Because every Sport gearbox uses a 4:1 ratio as it’s input stage, this makes for a simple addition to reduce the speed and increase the torque of any blue sport gearbox. Simply install this device between your desired input motor (such as a RedLine, CIM, Falcon or Dual Motor Input,) and the body of the gearbox, and you’re good to go. For example, you can turn a 4:1 gearbox that you already have into a 16:1 gearbox with this accessory. Each add-on stage comes with two 10-32 Socket Head Cap Screws used to mount the motor block. 

    Product Note: It is possible to exceed the maximum rated output torque when using this product with high powered motors and higher ratio configurations of the blue Sport gearboxes. Please carefully consider these load ratings when choosing to use this 4:1 add-on stage in these configurations.

     

     

     

    • Material: Aluminum
    • Gear Material: Steel
    • Ratio: 4:1
    • Weight: 0.23 Pounds

     

     

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Because every Sport gearbox uses a 4:1 ratio as it’s input stage, this makes for a simple addition to reduce the speed and increase the torque of any blue sport gearbox. Simply install this device between your desired input motor (such as a RedLine, CIM, Falcon or Dual Motor Input,) and the body of the gearbox, and you’re good to go. For example, you can turn a 4:1 gearbox that you already have into a 16:1 gearbox with this accessory. Each add-on stage comes with two 10-32 Socket Head Cap Screws used to mount the motor block. 

    Product Note: It is possible to exceed the maximum rated output torque when using this product with high powered motors and higher ratio configurations of the blue Sport gearboxes. Please carefully consider these load ratings when choosing to use this 4:1 add-on stage in these configurations.

     

     

     

    • Material: Aluminum
    • Gear Material: Steel
    • Ratio: 4:1
    • Weight: 0.23 Pounds

     

     

    Customers who bought this item also bought

    57 Sport & CIM Sport 3"Shaft

    #am-3791
    $24.50
    (2 In stock)

    This shaft is an optional part that be used in the 57 Sport Gearbox, as well as the CIM Sport Gearbox. If your application requires a longer output shaft you can disassemble the 57 Sport or CIM Sport and swap for this shaft.

    Specifications:

    • Material: Steel
    • Weight: 0.24 Pounds
    • Overall Length: 4.23 in.
    • Flat to Flat: 0.5 in. Hex
    • End of Shaft Feature: 10-32 Threaded Hole

    Climber in a Box - 1 Stage

    #am-4667
    $239.00
    (3 In stock)

    The AndyMark Climber in a Box is a robust, lightweight, configurable and affordable solution for climbing challenges historically present in FRC end game periods. The design of Climber in a Box has been inspired by many team designs along the way including 254 and 2056. The final prototype for this climber was developed in partnership with FRC Team 3940 CyberTooth for the 2020/2021 Infinite Recharge season. This mechanism has been battle tested with hundreds of climbs on a full weight FRC Robot without failures, both in development and real match play. Available in single and two stage configurations, this product should help teams of all levels elevate their team's performance at competitions.

     

    This product uses a "spring out, winch back" powertrain strategy, using off-the-shelf 3.5lb constant force springs to raise the included Hook Kit, and 3mm Dyneema Rope to retract it with the included Winch Kit. Simply unspool the included rope using a planetary gearbox to raise the hook(s), drive the robot up to the bar, and winch it back to elevate your robot. The AndyMark Climber in a Box does not include a motor or gearbox, but is compatible with many off-the-shelf planetary gearboxes on the market that have a 2" bolt circle mounting pattern and support a 2" long 1/2" hex output shaft, including the highly durable blue Sport Gearboxes.

     

    The bearing kits within this product are designed to go from 2" square 1/16" wall aluminum tubing, down to a 1" square 1/16" wall tube, with a 1.5" square 1/16" wall tube in between for the 2 stage flavor of this product. A combination of durable 608 bearings and custom molded plastic components provide the bearing surfaces for a free-flowing telescoping tube mechanism with no 3D printed parts. Each stage has a maximum travel of 24.5."

     

    The AndyMark Climber in a Box is an unassembled kit of everything you need (besides a gearmotor) that is designed to not require any precision machining in order to make your FRC robot climb. The plates included within the Hook Kit, Bearing Kits and Winch Kit are all designed to be assembled and used as drill guides for match drilling their mounting locations onto the aluminum tubes. Each tube is pre-cut to a 30" length so no cutting of the tubes is required to achieve maximum travel.

     

    Watch the teaser video here

    Climber in a Box Winch Spool Pulley 2 Stage

    #am-4647_2000
    $29.00
    (1 In stock)

    This spool is used in the Climber in a Box Winch Kit. It's used with 10 feet of Rope to create a strong elevator or winch system. 

    Specifications

    • Bore: 0.5 in. Hex
    • Ridge Diameter: 1.63 in.
    • Spool Diameter: 0.787 in.

    Documents

    CAD File(s)

    am-4647_2000 Full Winch Spool For 2 in. Box Tube.STEP

    am-4647_1500 Full Winch Spool For 1.5 in. Box Tube.STEP

    Layout Print(s)

    am-4647_1500 Climber in a Box 1 Stage Winch Spool.pdf

    am-4647_2000 Climber in a Box 2 Stage Winch Spool.pdf

    Tube Plug 1 X 1 Inch

    #am-4819
    $9.25
    (8 In stock)

    Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener.

    Tube Plug 2 X 1 Inch

    #am-4762
    $14.00
    (10 In stock)

    Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener. 

    Blue Sport Gearbox 2 in. Output Shaft

    #am-3781
    $22.00

    This is an optional replacement output shaft for our CIM Sport57 SportDual 775 Sport and Falcon Sport gearboxes. This shaft protrudes 2 in. from the face of the gearbox. If your application requires a slightly longer output shaft, you can disassemble the gearbox and swap for this shaft. Need an output even longer? Try the 3 in. long output shaft.