Close
Main Categories
    Filters
    Preferences
    Search

    48T 20 DP 0.5" Hex Bore, Steel Gea

    This gear is used on the Super Shifter, as an optional gear for the final stage. It is paired with the 17 Tooth Gear 500 Key Bore. 

    Specifications:

    • Number of teeth: 48
    • Diametral pitch: 20
    • Pressure angle: 14.5 degrees
    • Pitch Diameter: 2.4 inch
    • Face width: 0.54 inch
    • Overall width: 0.57 inch
    • Bore: 0.502 inch hex hole
    • Material: 4140 steel, cold formed into gear teeth
    • Weight: 0.64 lbs
    MFR Part #: am-0184
    $26.14
    Availability: In stock

     

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    Customers who bought this item also bought

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (87 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    Split Collar Clamp 1/2 in. Hex HD

    #am-1526
    $5.50
    (186 In stock)

    This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

    roboRIO Power Sauro Connector CTF020V8

    #am-2076
    $5.00
    (43 In stock)

    Sauro CTF020V8 connector, to be used as the power connector with  the roboRIO

     

    Aluminum Hex Shaft Stock, 1/2" width, 7075 6'

    #am-2291-6
    $89.00
    (21 In stock)

    Do you have a hard time finding some strong hex stock aluminum? We have it! This is 7075 series aluminum, which is great for use in transmission shafts.

     

    Specifications:

    • Material: 7075 Aluminum
    • Width: 1/2" hex (0.496-0.499 inches)
    • Weight: 0.27 pounds/ft
    • Length: You specify, 1 foot, 3 feet or 6 foot in length, +/- 1"

    SRX Magnetic Encoder

    #am-3445
    $65.00
    (In stock)

    The SRX Mag Encoder is a rotary sensor that can be used to measure rotational position and velocity. The device senses the magnetic field of a diametrically polarized magnet to determine rotational position with 12 bit precision. The device provides both a Quadrature interface that may be used for relative position measurement and a Pulse Width Modulated output for absolute position measurement. The device connects directly to the Talon SRX data port and is directly supported in the Talon SRX firmware. Please see Magnetic Encoder user's guide for more information and kit contents.

    Works with this cable:
    Talon SRX Data Cable, 6 in (am-2617)

    Included Components:

    • 1 - Clear ABS Housing
    • 1 - Magnet
    • 2 - 3-48 Housing Screws
    • 1 - 2-28 x 7/16" Screw
    • 1 - Encoder

    1/2 in. Steel Hex Shaft Stock - 6 foot

    #am-0856-6
    $44.00
    (10 In stock)

    1/2 in. hex shaft is the life of many competitive robot components. This 1018 steel shaft is available in four lengths. The five inch shaft was used in various Modulox gearboxes and may come with a 1/4 in. hole drilled in one end. The other sizes can be used as shaft stock, ready to be cut to length as needed. The stock lengths ship un-plated ready for your choice of finish. 

     

    Specifications

    • Diameter: 0.5 in. Hex
    • Finish: None
    • Length: 5 in.
    • Material: 1018 Steel
    • Weight: 0.74 lbs per ft