Six gauge battery cables have been around for a long time in competition robotics. With a larger wire gauge however, you can prolong your breaker life thanks to the lower resistance of the larger flexible wire. This battery cable features four gauge multi-strand wires along with a SB120 Anderson Power Products connector. This battery cable can be used with other power components using the SB120 connector.
Specifications:
Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.
The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:
Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.
Layout Print(s)
am-3571 2IN 375 Hex Compliant Wheel REV3.PDF
am-3462 2IN 500Hex Compliant Wheel REV3.PDF
am-3572 2IN 8mm Compliant Wheel REV4.PDF
CAD File(s)
am-3571 2IN 375Hex Compliant Wheel REV2.STEP
am-3572 2IN 8mm Compliant Wheel REV2.STEP
am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP
Additional File(s)
2 inch Compliant Wheel Expansion.pdf
Don't see what you need?
This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load. This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.
This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.
We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.
On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.
am-3860 90 Gusset REV2.PDF
am-4158 1IN Tee Gusset.PDF
am-4159 1IN Quad Gusset.PDF
am-4160 1IN 30deg Gusset.PDF
am-4161 1in 45deg Gusset.PDF
am-4162 1in 60deg Gusset.PDF
am-4163 1in 120deg Gusset.PDF
am-4164 1in 135deg Gusset.PDF
am-4165 1in 150deg Gusset.PDF
am-4166 1IN Sport Double Bearing Mount.PDF
am-4167 1IN 57Sport Side Mount Gusset.PDF
am-4168 1IN Bearing Side Mount Gusset.PDF
am-3860 90 Gusset REV2.STEP
am-4158 1IN Tee Gusset.STEP
am-4159 1IN Quad Gusset.STEP
am-4160 1IN 30deg Gusset.STEP
am-4161 1in 45deg Gusset.STEP
am-4162 1in 60deg Gusset.STEP
am-4163 1in 120deg Gusset.STEP
am-4164 1in 135deg Gusset.STEP
am-4165 1in 150deg Gusset.STEP
am-4166 1IN Sport Double Bearing Mount.STEP
am-4167 1IN 57Sport Side Mount Gusset.STEP
am-4168 1IN Bearing Side Mount Gusset.STEP
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
Tip-to-tip length is approximately 12.6 inches. Want it longer or shorter? We offer this cable in custom lengths! Both end connectors are crimped with a 6-ton pneumatic crimping tool. One end has connections to attach to the battery and the other has an SB50 Anderson Connector. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.
Which do you prefer a stiff cable or a flexible cable? No matter your choice we have the best option in either camp. PVC insulated cables create a stiff wire route maintaining shape for repeatable connections. EPDM jacketed cables cand bend and twist to accommodate tight spaces and small places.
This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March
Note: Setup directions for this radio can be found here, http://wpilib.screenstepslive.com/s/4485/m/13503/l/144986?data-resolve-url=true&data-manual-id=13503. Product Overview: Announced as the 2017 Radio for the FIRST Robotics Competition: http://www.firstinspires.org/robotics/frc/blog/2017-control-system-update To comply with new FCC (USA) and IC (Canada) regulations, this device does not allow non-Open Mesh firmware to be loaded, and no SSH access within the US or Canada. It also requires a new approval process for custom.sh files This radio will ship with default firmware and is only allowed to be used with Open Mesh firmware and FIRST Robotics Competition approved firmware. Compact size perfect for robot applications where WiFi is needed, including in the FIRST Robotics Competition environment. High speed, dual band 1.17 Gbps (300+867 Mbps) 802.11ac mini cloud-managed access point with 802.3af PoE support, dual Gigabit Ethernet ports and four internal antennas. Power Supply is not included with this Radio, 12V - 24V DC @ 1A Input, or PoE (24V Passive PoE or 48V 802.3af PoE) This radio is available to FIRST teams at a set price, please contact [email protected] if FIRST team price not shown. Warranty Info: Please contact Open Mesh for warranty issues or Return Merchandise Authorizations (RMA) for this product. Fill out this form to begin the process, http://www.open-mesh.com/rma Specifications:
Features:
Call for your exact configuration
You won't find a better power distribution setup than this board. Use it for testing intakes, arms, testing full robots, and more!
The best in simple power distribution is here. This board features six individually fused outputs, accepting auto-resetting 30 Amp fuses or auto-resetting breakers like am-4112. The input and outputs use 45 amp Anderson Powerpole connectors, allowing for easy and quick connections. Large copper traces allowing for plenty of currents to all outputs.
This board doesn't look the same! You're right, we've made several improvements to this amazing board. Improvements to the case are also included!