Close
Main Categories
    Filters
    Preferences
    Search

    AM14U Family End Plate


    This sheet metal plate makes up the end plate of the AM14U family of chassis. This plate captures the Inner and Outer plates and provides a surface to mount upper structures.

    Specifications

    • Depth: 0.13 in.
    • Flange Depth: 1.375 in.,2.125 in.
    • Height: 3.34 in.
    • Material: 5052 Aluminum
    • Overall Length: 31 in.
    • Weight: 2.3 lbs
    MFR Part #: am-3920
    $51.25
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    10-32 Nylock Nut

    #am-1042
    $0.08
    (In stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    10-32 x 0.75 in. Socket Head Cap Screw - Min 25

    #am-1047
    $0.29
    (In stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: 10-32
    • Length: 3/4"
    • Head: Socket Head Cap Screw

    1/4-20 x 0.75 in. Self Tapping Hex Washer Head Screw

    #am-1310
    $1.20
    (0 In stock)

    This is a thread rolling screw that is 0.75 in. long.

     

    This item can only be purchased in multiples of 10

     

    Specifications

    • Drive: 3/8 in. Unslotted Hex
    • Finish: Zinc
    • Length: 0.75 in.
    • Material: Steel
    • Thread: 1/4-20
    • Weight: 0.02 lbs

    Retainer Clip, 8mm id

    #am-0033
    $0.38
    (In stock)

    This retainer clip is used to hold objects (such as gears) in place on shafts. 

    Example: This product can be used to hold a gear onto a CIM motor shaft. 

    Specification: 

    • Material: Steel
    • Inner Diameter: 8mm
    • Outer Diameter: 15mm
    • Weight: Less than 0.001 lbs

    Andymark Hubs 1/2 in. Hex

    #am-4124
    $12.00
    (In stock)

    Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more. 

     

    The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!

     

    Learn how to attach these hubs to AndyMark wheels by watching this video!

    External Klipring for 1/2 inch shaft

    #am-0206
    $0.47
    (In stock)

    E-Clip ring for 1/2" shaft 

    Specifications:

    • Material: steel w/ black phosphate coating
    • Thickness: 0.05 inch
    • Outside Diameter: 0.89 inch
    • Groove Diameter: 0.44 +/- 0.008 inch
    • Groove Thickness: 0.056-0.062 inch
    • Weight: 0.0026 pounds