This bushing fits into any 8mm hole such as those seen on tubing in the S3 Ecosystem. The bushing supports a 6mm shaft allowing you to use our precision 6mm D Shafts with the S3 Ecosystem and other systems. 

Specifications:

• Inner Diameter: 6mm (0.24 in.)
• Outer Diammeter: 8mm (0.31 in.)
• Overall Length: 6mm (0.24 in.)

Specifications:

• Inside Diameter: 0.315" (8mm)
• Outside Diameter: 0.748" (19mm)
• Width: 0.236" (6mm)
• Weight: 0.016 Lbs

Specifications:

• ID: 6mm
• OD: 12mm
• Flange OD: 13.6mm
• Thickness: 4mm
• Flange Thickness: 0.8mm

Product Overview: 

• This is the Ball Bearing used to hold the Output Shaft of the CIM-Sim Gearbox.

Specifications:

• Weight: 0.02 Lb
• Inside Diameter: 8mm
• Outside Diameter: 19mm
• Overall Thickness: 6mm
• Flange Diameter: 22mm
• Flange Thickness: 1.5mm

This nub can be used to support the end of a 6mm D shaft, and be bolted to an S3 rail, a Ninja sprocket, pulley or wheel. With this you could create an idler sprocket, free spinning wheel or wheels on dead axles. This Nub also works as a bearing mount for a spinning axle.

Specifications:

• Length: 0.63 in. (16 mm)
• Height: 0.63 in. (16 mm)
• Depth: 0.394 in.
• Material: 6061-T6 Aluminum
• Bore: 0.236 in. (6 mm)
• Weight: 0.009 Pounds

Product Overview: 

• Ball bearing, 1-1/4 bore, with double shields, ABEC-1

This robust bearing is used on the Swerve & Steer Module.

Specifications:

• Inside Diameter: 1.250 inch
• Outside Diameter: 2.250 inches
• Thickness: 0.500 inch
• Material: Steel
• Shields: yes, steel
• Maximum Load: 12,000 pounds, dynamic
• ABEC-1
• Weight: 0.26

This is the bronze bushing (and spacer!) used in the Worm Gearbox (am-0917).

Specifications:

• Weight: 0.013 pounds
• Material: Bronze
• Inside Diameter: 5/16"
• Outside Diameter: 0.5"
• Length: 0.5"

This bearing plate is a great way to mount a 0.875 in. OD (FR6) bearing into thin or weak material that otherwise could not tolerate or support a press-fit.

Specifications:

• Material: 5052 Aluminum
• Bore: Press fit for FR6 bearing
• Thickness: 0.125 in.
• Bolt Pattern: 4x clearance for #10-32 on 2.00 in. circle
• Length: 1.875 in.
• Width: 1.875 in.
• Weight: 0.032 Pounds

Specifications:

• Inside diameter: 0.500 inch
• Outside diameter: 1.125 inch
• Overall Thickness: 0.312 inch
• Weight: 0.046 pounds

Product Overview: 

• 1/2" id, shielded, flanged ball bearing 

Specifications:

• Inside Diameter: 0.500 inch
• Outside Diameter: 1.125 inch
• Flange Thickness: 0.062 inch
• Overall Thickness: 0.312 inch
• Weight: 0.052 pounds
• Material: Steel

Specifications:

• Inside Diameter: 0.500 inch
• Outside Diameter: 1.125 inch
• Overall Thickness: 0.249 inch
• Weight: 0.038 pounds
• Material: Steel

Steel sleeve bushing with self-lubricating bearing surface 

Specifications:

• Structure material: steel
• Lubrication material: TPFE, located on the inside diameter
• Bore: 0.500 inch
• Outside diameter: 0.598 inch
• Overall length: 0.500 inch
• Weight: 0.012 pounds

Product Overview: 

• 3/16" id Ball Bearing 

Specifications:

• Inner diameter: 0.1875 inch
• Outer diameter: 0.500 inch
• Thickness: 0.156 inch
• Weight: 0.016 pounds

3/8" id shielded ball bearing 

Double Shielded Common industry part number: 1614ZZ 

Specifications:

• Inside Diameter: 0.375 inch
• Outside Diameter: 1.125 inch
• Width: 0.375 inch
• Weight: 0.064 pounds

3/8" id shielded, flanged ball bearing 

Specifications:

• Inside Diameter: 0.375 inch
• Outside Diameter: 0.875 inch
• Flange Thickness: 0.062 inch
• Overall Thickness: 0.280 inch
• Weight: 0.026 pounds
• Material: Steel

3/8" id shielded ABEC1 ball bearing

Please note: this bearing has been updated (as of Nov. 16th, 2011). Previously, the thickness of the inner race was wider, and this was a more rough-rolling bearing.

Specifications: 

• inside diameter: 0.375 inch
• outside diameter: 1.125 inch
• overall thickness: 0.312 inch
• flange diameter: 1.250 inch
• flange thickness: 0.062 inch
• Weight: 0.07 pound