Close
Main Categories
    Filters
    Preferences
    Search

    Compact Elevator Bearing Kits (2 Stage Kit)

    The AndyMark Compact Elevator system is our next generation line of products to help FIRST Robotics Competition teams create high quality, reliable and robust linear motion mechanisms, such as an elevator or extension arm. The core of this system are the Bearing Kits, which are designed to be easily integrated into your robot design, and provide smooth rolling motion for your linear mechanisms. The primary load direction is supported by high strength 13mm Cam Follower needle bearings installed within machined aluminum blocks for a compact but robust bearing solution. The secondary load (or lateral loads, in a traditional FRC elevator,) is supported by 695ZZ ball bearings to keep your linear mechanisms moving and aligned. The 6061-T6 aluminum blocks have thoughtfully designed features integrated into them, including alignment grooves to help locate and support them along box tubes, as well as nut pockets machined in to support the M5 nylock nuts that retain the Cam Follower bearings.

     

    These bearing kits are designed to accommodate up to .125" wall 1x1 and 2x1 Aluminum Box Tubing. Available in single corner bearing kits, 4 packs for 1 stage mechanisms and 8 packs for 2 stage mechanisms.

    MFR Part #: am-4870_8
    $295.00
    Availability: 4 in stock

    These bearing kits ship as an unassembled kit of parts.

    Items included in am-4870:

    • 1 - 1x1 Compact Elevator Bearing Block (am-4410)
    • 2 - 13mm Cam Follower (am-4246)
    • 2 - M5-0.8 Nylock Nut (am-1022)
    • 1 - 10-32 x 0.625" FHCS (am-1252)
    • 2 - 10-32 Nylock Jam Nut (am-1063)
    • 1 - 10-32 x 1.750" SHCS (am-1048)
    • 2 - 695ZZ 13mm OD, 5mm ID Shielded Ball Bearing (am-4724)
    • 1 - 0.313" OD x 0.192" ID x 0.688" L Aluminum Spacer (am-1682)

    Items included in am-4875:

    • 1 - 2x1 Compact Elevator Bearing Block (am-4411)
    • 2 - 13mm Cam Follower (am-4246)
    • 2 - M5-0.8 Nylock Nut (am-1022)
    • 2 - 10-32 x 0.625" FHCS (am-1252)
    • 3 - 10-32 Nylock Jam Nut (am-1063)
    • 1 - 10-32 x 2.750" SHCS (am-1397)
    • 2 - 695ZZ 13mm OD, 5mm ID Shielded Ball Bearing (am-4724)
    • 1 - 0.313" OD x 0.192" ID x 0.688" L Aluminum Spacer (am-1682)
    • 1 - 0.313" OD x 0.192" ID x 1.000" L Aluminum Spacer (am-1683)
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    These bearing kits ship as an unassembled kit of parts.

    Items included in am-4870:

    • 1 - 1x1 Compact Elevator Bearing Block (am-4410)
    • 2 - 13mm Cam Follower (am-4246)
    • 2 - M5-0.8 Nylock Nut (am-1022)
    • 1 - 10-32 x 0.625" FHCS (am-1252)
    • 2 - 10-32 Nylock Jam Nut (am-1063)
    • 1 - 10-32 x 1.750" SHCS (am-1048)
    • 2 - 695ZZ 13mm OD, 5mm ID Shielded Ball Bearing (am-4724)
    • 1 - 0.313" OD x 0.192" ID x 0.688" L Aluminum Spacer (am-1682)

    Items included in am-4875:

    • 1 - 2x1 Compact Elevator Bearing Block (am-4411)
    • 2 - 13mm Cam Follower (am-4246)
    • 2 - M5-0.8 Nylock Nut (am-1022)
    • 2 - 10-32 x 0.625" FHCS (am-1252)
    • 3 - 10-32 Nylock Jam Nut (am-1063)
    • 1 - 10-32 x 2.750" SHCS (am-1397)
    • 2 - 695ZZ 13mm OD, 5mm ID Shielded Ball Bearing (am-4724)
    • 1 - 0.313" OD x 0.192" ID x 0.688" L Aluminum Spacer (am-1682)
    • 1 - 0.313" OD x 0.192" ID x 1.000" L Aluminum Spacer (am-1683)
    Customers who bought this item also bought

    2.25 inch Compliant Wheel, 1/2 inch Hex, 35A Durometer, Green

    #am-3949_green
    $10.00
    ( 26 In stock)

    These 2.25" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.

    2.25 inch Compliant Wheel, 1/2 inch Hex, 50A Durometer, Blue

    #am-3949_blue
    $10.00
    ( 51 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
    • Core Material: Polycarbonate
    • Diameter: 2.25 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.08 lbs
    • Width: 1 in.

     

    Documents

    Layout Print(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel REV3.PDF

    am-3950 2.25IN 375Hex HD Compliant Wheel REV3.PDF

    am-4536 2.25in HD 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel.STEP

    am-3950 2.25IN 375Hex HD Compliant Wheel.STEP

    am-4536 2IN OverMolded 5mm Hex Compliant Wheel.STEP

    2.25 inch Compliant Wheel, 1/2 inch Hex, 60A Durometer, Black

    #am-3949_black
    $10.00
    ( 26 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.

     

    Specifications

    • Bore: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
    • Core Material: Polycarbonate
    • Diameter: 2.25 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.08 lbs
    • Width: 1 in.

     

    Documents

    Layout Print(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel REV3.PDF

    am-3950 2.25IN 375Hex HD Compliant Wheel REV3.PDF

    am-4536 2.25in HD 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel.STEP

    am-3950 2.25IN 375Hex HD Compliant Wheel.STEP

    am-4536 2IN OverMolded 5mm Hex Compliant Wheel.STEP

    2.25 inch Compliant Wheel, 1/2 Inch Hex, 40A Durometer, Orange

    #am-3949_orange
    $10.00
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
    • Core Material: Polycarbonate
    • Diameter: 2.25 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.08 lbs
    • Width: 1 in.

     

    Documents

     

    Layout Print(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel REV3.PDF

    am-3950 2.25IN 375Hex HD Compliant Wheel REV3.PDF

    am-4536 2.25in HD 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3949 2.25IN 500Hex HD Compliant Wheel.STEP

    am-3950 2.25IN 375Hex HD Compliant Wheel.STEP

    am-4536 2IN OverMolded 5mm Hex Compliant Wheel.STEP

    3 inch Compliant Wheel, 1/2 inch Hex, 35A Durometer, Green

    #am-3945_green
    $11.00
    ( 86 In stock)

    You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.



    Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.5 in. Hex, 5 mm Hex
    • Color: Green, Black, Blue, Black
    • Core Material: Polycarbonate
    • Diameter: 3 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.12 lbs
    • Overall Width: 1 in.

     

    Documents

     

    Layout Print(s)

    am-3946 3IN 375Hex Compliant Wheel REV3.PDF

    am-3945 3IN 500Hex Compliant Wheel REV3.PDF

    am-4537 3in 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3946 3IN 375Hex Compliant Wheel REV 3.STEP

    am-3945 3IN 500Hex Compliant Wheel REV 3.STEP

    am-4537 3in 5mm Hex Molded Compliant Wheel.STEP

    3 inch Compliant Wheel, 1/2 inch Hex, 50A Durometer, Blue

    #am-3945_blue
    $11.00
    ( 32 In stock)

    You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.



    Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.5 in. Hex, 5 mm Hex
    • Color: Green, Black, Blue, Black
    • Core Material: Polycarbonate
    • Diameter: 3 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.12 lbs
    • Overall Width: 1 in.

     

    Documents

     

    Layout Print(s)

    am-3946 3IN 375Hex Compliant Wheel REV3.PDF

    am-3945 3IN 500Hex Compliant Wheel REV3.PDF

    am-4537 3in 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3946 3IN 375Hex Compliant Wheel REV 3.STEP

    am-3945 3IN 500Hex Compliant Wheel REV 3.STEP

    am-4537 3in 5mm Hex Molded Compliant Wheel.STEP