Close
Main Categories
    Filters
    Preferences
    Search

    Electrical Components

    Electrical Components

    View as Grid List
    Sort by
    Display per page

    4 Gauge Robot Side Red & Black Power Cable

    #am-3851
    $30.75
    (In stock)

    This four gauge power cable is used on the robot to connect a 120 Amp Breaker (am-0282) and a Power Distribution Panel (am-2856) to a power component. This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool, and utilizes an Anderson SB120 for connecting to your power source. 

    Specifications:

    • Gauge: 4
    • Weight: 0.562 Pounds
    • Connector Type: Anderson SB120
    • Overall Length: ~14 in. (+/- 0.25 in.)
    • Red Wire Length (SB120 to Lug): ~ 9.5 in. (+/- 0.25 in.)
    • Black Wire Length (SB120 to Lug): ~ 16 in. (+/- 0.25 in.)

    4 Gauge Robot Side Red Power Cable

    #am-3852
    $15.38
    (In stock)

    This four gauge power cable is used to connect a 120 Amp Breaker (am-0282) to a Power Distribution Panel (am-2856). This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool. 

    Specifications:

    • Gauge: 4
    • Weight: 0.1 Pounds
    • Overall Length: 5 in. (+/- 0.25 in.)
    • Wire Length Lug to Lug: ~4 in. (+/- 0.25 in.)

    40 Amp Snap Action Breaker

    #am-0288
    $11.00
    (In stock)

    Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions. 

     

    Specifications

    • Manufacturer: Snap Action
    • Style: MINI, Auto-resetting
    • Voltage: Up to 50V DC

    5 Amp Snap Action Breaker

    #am-2096
    $9.00
    (In stock)

    Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions. 

    Specifications

    • Manufacturer: Snap Action
    • Style: MINI, Auto-resetting
    • Voltage: Up to 50V DC

    50 pack of assorted Shrink Tubing Sizes

    #am-2233
    $22.00
    (3 In stock)

    AndyMark heat shrink tubing in an assorted variety. 

    Included Hardware:

    • Ten - Individual AndyMark Shrink Tubing (8-12AWG)
    • Twenty - Individual AndyMark Shrink Tubing (6-8AWG)
    • Twenty - Individual AndyMark Shrink Tubing (6-12AWG)

    6 Gauge 12 Inch Battery Cable - Stiff PVC Insulation

    #am-0009
    $26.50
    (10 In stock)

    Tip-to-tip length is approximately 12.6 inches.

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    6 Gauge Red Robot Power Cable

    #am-0699
    $13.84
    (In stock)

    This is a handy cable to connect the 120 amp breaker to the Power Distribution Panel. The cable is made of 6 gauge multi-strand wire while the connectors are securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately 5 inches. This cable is used in the Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool. 

    Specifications:

    • Gauge: 6
    • Weight: 0.3 pounds
    • Overall Length: Approximately 7 in.

    Included Hardware: 

    • One - 6 gauge multistrand (50 strands) wire, red @ ~5"
    • Two - Molex crimp connectors w/ 1/4" diameter ring (2)
    • Two - Blue heat shrinks over Molex connecto

    6 Gauge Wire - 10 ft length, Black, Rigid PVC

    #am-2840
    $29.00
    (In stock)

    Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

     

    Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

     

    SKUs:

    • am-2840 - PVC Insulated Black
    • am-2841 - PVC Insulated Red
    • am-4485_black - EPDM Insulated Black
    • am-4485_red - EPDM Insulated Red

     

    Specifications

    • Color: Black and Red
    • Current: 115A for Silicone Wire
    • Diameter: 0.32 in. Silicone Wire
    • Gauge: 6
    • Insulation: Flexible EPDM, Rigid PVC
    • Length: 10 Feet (+/- 1 in.)
    • Operating Temperature: -59°F to 257°F for PVC Wire
    • Strand Count: 49 Inside PVC, 263 Inside EPDM
    • Voltage: 60V for PVC Wire

    6 Gauge Wire - 10 ft length, Red, Rigid PVC

    #am-2841
    $29.00
    (In stock)

    Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

     

    Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

     

    SKUs:

    • am-2840 - PVC Insulated Black
    • am-2841 - PVC Insulated Red
    • am-4485_black - EPDM Insulated Black
    • am-4485_red - EPDM Insulated Red

     

    Specifications

    • Color: Black and Red
    • Current: 115A for Silicone Wire
    • Diameter: 0.32 in. Silicone Wire
    • Gauge: 6
    • Insulation: Flexible EPDM, Rigid PVC
    • Length: 10 Feet (+/- 1 in.)
    • Operating Temperature: -59°F to 257°F for PVC Wire
    • Strand Count: 49 Inside PVC, 263 Inside EPDM
    • Voltage: 60V for PVC Wire

    AM Mag Encoder

    #am-3749
    $52.00
    (In stock)

    The AM Mag Encoder is designed for a wide range of uses. This is the fastest encoder AndyMark sells with a rating of ~30,000 RPM. It features a 1024 quadrature encoder output, an index pulse, and a pulse width varied position output. The board provides mounting for M3 screws, spaced 1 in. apart. 

    With the RedLine Encoder Kit (am-3773), this encoder can be added to any 775 motor with a 5mm back shaft, such as the AndyMark RedLine Motor. 

    Specifications:

    • Voltage: 5V
    • Output: 1024CPR, Index, PWM Position
    • RPM: ~30,000
    • Weight: 0.0175 Pounds

    AM Robot Signal Light

    #am-3583
    $79.95
    (In stock)

    Our Robot Signal Light is designed to work with the robo-RIO's RSL port to provide a quick visual indicator of robot status. This is not the 855PB-B12ME522 light specified by R70 of the 2017 FIRST Robotics Competition manual, but it does provide similar functionality.

    We're offering this product so teams can use all the diagnostic features of the robo-RIO at an affordable price when legality and compactness isn't a priority. Our light housing is larger, and it is wired with two spade connectors. There is no polarity on the light housing, so it is not possible to wire backwards. 

    To wire this light, we recommend our 2-wire cable (am-2133) and either soldering to the spade connections or using a female spade connector available separately.

    Specifications:

    • Weight: 0.1085 pounds without lead wires
    • Height: 3.23 in. from top of dome to bottom of mounting stem
    • Dome height: 2.09 in.
    • Dome diameter: 2.24 in.
    • Mounting stem diameter: 0.850 in.
    • Mounting threads: M22x1.5, nut included

    Anderson Power Connector with two alligator clips

    #am-2561
    $15.00
    (In stock)

    This is the perfect fit to connect any 12V Lead Acid Battery, like the MK ES17-12 to either our 1-Bank or 3-Bank chargers. It also helps connect the Battery Beak to 12V Lead Acid or 7.2V/9.6V/12V NIMH batteries. You can connect to a battery with our Battery Cable installed, and connect to your needs using the Alligator Clips. On the Anderson Power Connector end, the connectors are crimped with a 6-ton pneumatic crimping tool, the others are crimped to Alligator Clips for easy attachment to terminals.

    Specifications:

    • Weight: 0.12 Pounds
    • Length: Approximately 12-15"
    • Connector Type: SB-50A Anderson Power Products connector & Color Coded Alligator Clips
    • Gauge: 12

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole

    Assembled String Potentiometer

    #am-2674BUILT
    $79.00
    (0 In stock)

    A string potentiometer is a great way to detect position and travel for a robot mechanism. Spring-tension inside the enclosure ensures the string retracts as your mechanism does.

    Note: The color of the enclosure will vary.

    Assorted Heat Shrink Tubing Kit, Red, 127 Pieces

    #am-2861
    $15.00
    (1 In stock)

    AndyMark heat shrink tubing in an assorted sizes. Shrinks at a 2:1 ratio.

    Included Items:

    • 30 - 2mm x 40mm
    • 25 - 2.5mm x 40mm
    • 20 - 3.5mm x 40mm
    • 20 - 5mm x 40mm
    • 16 - 7mm x 80mm
    • 8 - 10mm x 80mm
    • 8 - 13mm x 85mm