FIRST Tech Challenge INTO THE DEEP Partial Game Set

May be used with 6mm D-Shape Shaft to secure wheels in their position.
 

Specifications:

• Φ20.0mm*8.0mm thick
• 1*M3 thread for M3 SHCS on the clamp side
• Φ6.0mm D hole
• AL6061-T6
• Step File

The Grasshopper nut, produced with the help of James Cole-Henry from FRC team 95, The Grasshoppers, is an innovative battery solution to increase the reliability of battery terminal connections.

Soft Tiles are 2' x 2' x 5/8" thick gray floor mats that are used on the FIRST Tech Challenge (am-0481b) playing field.  A full FTC field requires 36 tiles.

The interlocking edges of these tiles connect nicely for a quick setup and will stay firmly in place.  The edges can be easily cut for a straight edge if desired.  The tiles are double-sided with both a textured and a smooth side to suit any need.  Disassembly is simple and we suggest these Soft Tile Bags for storage and transport.  Each bag can carry up to 18 tiles.

These tiles are ideally suited for a variety of purposes and are perfect for exercise areas, playrooms, and workshops.  The soft, durable mats would also work well anywhere that needs a bit more cushion - including camping or as an anti-fatigue standing mat.

Tiles can also be purchased in single quantities or packs of four.

Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

Specifications:

• Material: Steel
• Number of teeth: 30
• Set of 2 for 1-1 drives
• Step File

This Tape Set includes all the tape you need for the 2024-2025 FIRST Tech Challenge game, INTO THE DEEP℠ presented by RTX.

We also offer a INTO THE DEEP℠ Tool Set.

Components in am-5400_tape:

• 1 - White Gaffers Tape 1 in. x 165 ft (am-4951)
• 1 - Red Gaffers Tape 1 in. x 165 ft (am-4952)
• 1 - Blue Gaffers Tape 1 in. x 165 ft (am-4953)

The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

Specifcation:

• Stainless Steel
• 432mm length
• 6mm OD
• 5.5mm to flat
• Step File

Limelight 3A is a plug and play, zero-code perception system for FIRST Tech Challenge Teams. Based on the battle-tested Limelight 3 for FRC, it brings high performance AprilTag tracking, game piece tracking, and full-field robot localization to teams of all experience levels.

*The REV Control Hub can only support a single LL3A at this time.*