Tetrix FTC Competition Set

Take your TETRIX robots to the next level with a stronger 12-volt DC motor with 100 rpm and 700 oz-in. of torque. The motor features a built-in, high-resolution Hall effect encoder for precise motor control. Based on user feedback and created specifically to withstand the stress of intense robotics competitions, this is our strongest TETRIX motor yet. TorqueNADO is compatible with allTetrix Max; DC Motor Mounts.

Specs:

• Weight: 324 grams
• Operating Voltage: 12 volts
• Length: 134.1 mm/5.29 inches
• Gear Ratios: 60:1
• Diameter: 37 mm

• Used with M3 screws

The 100mm (4 inch)  Double Plastic Omni Wheel provides rotational and sideways 360° maneuverability.  Great for omni directional movement and rotation, easy direction control and tracking, and for fast turning,

Specifications:

• Diameter:   100mm (4")
• Axial width:  16mm
• Hub:    6mm (included)
• Number of plate:  2
• Number of roller: 18
• Body material:    Nylon
• Roller material:   Rubber
• Roller diameter:  19mm
• Net weight:          275g
• Load capacity:    20kg
• Step File

The Studica Robot Base Plate is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Thickness - 3mm
• Width - 288mm
• Length - 336mm
• Step File

This is a connector cable to fit our 8.2 ft RGB LED light strip.

Specifications:

• Length: 10cm
• Weight: 0.1 lbs

This is the cable used with an Absolute Encoder. 3-pin micro mating connector on one end of 3 individual discrete 26 AWG wires. Standard length is 1FT. 
 

• Pin 1: Orange, 5VDC
• Pin 2: Blue, Analog/ PWM
• Pin 3: Brown, Ground

This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.
 

Note: Product received may vary from image shown. Some cables may ship with a separate protective housing on the male end of the cable. If this housing interferes with your application it can be removed with a small screwdriver gently inserted between the connector and the housing.

Specifications

• Length: 12 in.
• Weight: 0.024 lbs
• Wire Colors: white, red, black

Digilab 3D Filament - PLA White is great for items that evoke elegance and simplicity. Like all Dremel filament, this cartridge has been designed and tested to work specifically with your 3D Idea Builder - the latest in 3D printing technology from Dremel. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. This filament produces a stable, strong object with a high quality finish.

• Specifically designed to work the best with your Dremel 3D printer
• Dremel PLA filament is plant-based and recyclable
• Manufactured and tested to provide smooth and consistent building

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

Specifications:

• Weight: pounds
• Length: Approximately 24 inches
• Connector Type: Anderson PowerPole PP45
• Gauge: 12 bonded