Close
Main Categories
    Filters
    Preferences
    Search

    Gears

    Gears

    View as Grid List
    Sort by
    Display per page

    12T 32DP 24T Servo Spline Bore, Brass Gear

    #am-2525
    $30.75
    (In stock)

    Servo City's patented 32 pitch Hitec metal gears are designed to attach directly to the output spline of a servo. All gears are broached directly into the metal to ensure a snug fit that will not slip. These gears are designed to fit the standard 24 tooth Hitec output spline.

    Specifications:

    • Number of teeth: 12
    • Diametral pitch: 32
    • Pitch diameter: .375
    • Face width: 0.250"
    • Bore: 24T Servo Spline
    • Weight: 0.008

    11T 0.6 Module 0.125" Round Bore, Steel Gear

    #am-2537
    $10.00
    (0 In stock)

    This is an 11 tooth steel gear. This gear fits onto the 9015 motor shaft so that the 9015 motor can mate with the PG27 gearbox. 

    Specifications:

    • Number of teeth: 11
    • Module: 0.6
    • Pitch Diameter: 6.6 mm
    • Pressure Angle: 20
    • Bore 3.17mm (0.125 inch)
    • Overall Thickness: 8mm
    • Overall Diameter: 0.406"
    • Weight: 0.001 lbs
    • Material: 1215 Steel

    43T 20DP 0.5" Hex Bore, Steel Gear

    #am-2565
    $24.60
    (In stock)

    This gear can be used in the used in the Toughbox series gearboxes, replacing the 50 Tooth Large Output Gear. It would be paired with a 21 Tooth Small Cluster Gear, in order to increase the output speed of the Toughbox.

    Standard Toughbox output reduction: 12.75:1
    New Toughbox output reduction, using this gear and a 21 Tooth Small Cluster Gear: 7.31:1

    Specifications:

    • Material: 4140 Steel
    • Diametral pitch: 20
    • Pressure angle: 14.5 degrees
    • Number of teeth: 43
    • Pitch diameter: 2.15 inch
    • Bore: 1/2" Hex (0.501-0.504 inch)
    • Thickness: 0.373 inch
    • Weight: 0.34 pound

    40T 1.25 Module 0.375" Hex Bore, Steel Bevel Gear

    #am-2620
    $64.58
    (0 In stock)

    This 40 tooth bevel gear is paired with a 20 tooth bevel gear (am-2621) to make the LJ Bevel Box (am-2622)

    Specifications:

    • Material: 4020 Steel
    • Module 1.25
    • Number of teeth: 40
    • Pitch diameter: 50mm
    • Bore: 3/8" Hex
    • Weight: 0.19 pound

    20T 1.25 Module 8mm Round Bore with 2mm Keyway, Steel Bevel Gear

    #am-2621
    $44.59
    (In stock)

    This 20 tooth bevel gear is paired with a 40 tooth bevel gear (am-2620) to make the LJ Bevel Box (am-2622)

    Specifications:

    • Material: 4020 Steel
    • Module: 1.25
    • Number of teeth: 20
    • Pitch diameter: 25mm
    • Bore: 8mm with 2mm Key
    • Weight: 0.09 pound

    32T 20DP 10mm Round Bore with 4mm Keyway, Steel Gear

    #am-2631
    $23.06
    (In stock)

    This gear fits on the PG27, PG71, and PG188 10mm output shaft. It is used in the AM Turret.

    Specifications:

    • Number of teeth: 32
    • Diametral pitch: 20
    • Pitch diameter: 1.6 inch
    • Pressure angle: 14.5 degrees
    • Face width: 0.4 inch
    • Overall width: 0.4 inch
    • Bore: 10mm (0.395 inch) diameter hole w/ 4mm (0.158 inch) keyway
    • Material: 4140 steel, cold formed into gear teeth
    • Weight: 0.2 lbs.

    40T 20DP 0.5" Round Bore, Aluminum Gear

    #am-3013
    $43.05
    (In stock)

    This 40 tooth aluminum gear is pivotal in steering the Swerve & Steer module. It mates with a 48 tooth gear which is driven from the PG71 gear-motor. The surface of this aluminum gear is treated with a very durable hard coat anodization to allow for wear. This gear receives a fairly low torque, and therefore aluminum is a good, lightweight material for it's use.

    Specifications:

    • Material: 6061 Aluminum with hard coat anodizing
    • Diametral pitch: 20
    • Pressure angle: 14.5 degrees
    • Number of teeth: 40
    • Pitch diameter: 2.00 inch
    • Bore: 0.500 inch
    • Gear Face Width: 0.400 inch
    • Thickness: 1.13 inch
    • Weight: 0.11 pound

    12T, NeveRest Classic Motor Pinion Gear

    #am-3104_pinion
    $6.15
    (In stock)

    This gear comes standard as the pinion for the NeveRest motor, am-3104 

    Specifications:

    • Module: 0.5
    • Tooth Count: 12
    • Pressure Angle: 20 Degrees
    • Helix Angle: 18 Degrees, Left
    • Bore: 2.98mm

    35T 20DP 1.1244" Round Bore, Steel Gear

    #am-3328
    $26.14
    (In stock)

    Overview:
    This 35 Tooth Dog Gear features a bearing bore suited to press fit a 1.125" diameter bearing, allowing this gear to serve as an output gear on a 0.500" shaft, as featured in our Rocketbox PTO.

    Specifications:

    • Material: 4140 Steel
    • Diametral pitch: 20
    • Pressure angle: 14.5
    • Number of teeth: 35
    • Pitch Diameter: 1.75 inch
    • Bore: 1.1249" - 1.1241"
    • Thickness: 0.425"
    • Weight: 0.154

    15T 32DP 0.312 Bore Steel Gear

    #am-3482
    $13.84
    (16 In stock)

    This gear is used as the input pinion gear for the EVO Shifter. This gear is a tight press fit onto a CIM gear, and requires at minimum a 3-ton arbor press to install. If a CIM motor with this gear pre-installed interests you, check out am-0255_15T. 

    Specifications:

    • Tooth Count: 15
    • Diametral Pitch: 32
    • Pressure Angle: 20
    • Pitch Diameter: 0.469"
    • Face Width: 0.531"
    • Thickness: 0.75"
    • Material: 1117 Steel
    • Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
    • Weight: 0.019 Lbs

    14T 20 DP 0.375" Hex Bore, Steel Gear

    #am-3484
    $18.45
    (In stock)

    Specifications:

    • Tooth Count: 14
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 0.7
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.375" Hex
    • Weight: 0.029 Lbs

    24T 20 DP 0.375" Hex Bore, Steel Gear

    #am-3485
    $19.99
    (In stock)

    Specifications:

    • Tooth Count: 24
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.2"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.375" Hex
    • Weight: 0.1 Lbs

    35T 20 DP 0.5" Hex Bore, Steel Gear

    #am-3486
    $23.06
    (In stock)

    Specifications:

    • Tooth Count: 35
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.75"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.5" Hex
    • Weight: 0.146 Lbs

    50T 20DP 0.5" Hex Bore, Steel Gear

    #am-3488
    $27.68
    (In stock)

    Specifications:

    • Tooth Count: 50
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 2.5"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.5" Hex
    • Weight: 0.25 Lbs

    32 Tooth 20 DP 4 Tooth Steel Dog Gear

    #am-3489
    $26.14
    (In stock)

    Specifications:

    • Tooth Count: 32
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.6"
    • Face Width: 0.438"
    • Material: 4140 Steel
    • Dog Profile: 4 Tooth, 90 Degrees Opposed
    • Bearing Bore: 1.124"
    • Weight: 0.125 Lbs

    40T 20 DP 4 Tooth Steel Dog Gear

    #am-3490
    $26.14
    (In stock)

    Specifications:

    • Tooth Count: 40
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 2"
    • Face Width: 0.438"
    • Material: 4140 Steel
    • Dog Profile: 4 Tooth, 90 Degrees Opposed
    • Bearing Bore: 1.124"
    • Weight: 0.226 Lbs