Close
Main Categories
    Filters
    Preferences
    Search

    Limelight 3 (For sale in CANADA only)

    Limelight 3 is the 4th iteration of a plug-and-play smart camera purpose-built for the FIRST Robotics Competition. No experience required. Limelight is easy enough for teams with no vision experience or expert mentors, and powerful enough for experienced teams who need a reliable, competition-ready vision solution.

    For more information, go here.

    For warranty issues with this product, please e-mail:support@limelightvision.io.

    MFR Part #: am-3833c
    $615.00
    You can not purchase this item for these countries - United States
    Availability: 10 in stock

    Updates From Limelight 2+ to 3:

    • 30% Smaller
    • Low-latency, sensor-limited retro-reflective tracking improvements: 
      • 480p at 90fps
      • 960p at 40fps
      • 720p at 40fps
      • 2592x1944 (5 megapixels) at 13-15fps
    • Zero-Code AprilTag tracking
    • Zero-Code robot localization with AprilTags and Limelight MegaTag
    • Zero-Code neural network inference with Google Coral
    • Learn and build on your own with custom, full python vision pipelines
    • Significantly improved thermal performance
    • 5.0Gbps USB 3.0 for low-latency Google Coral acceleration
    • Gigabit Ethernet
    • 15-second boot time
    • Impact-resistant illumination LED board mount to prevent broken LEDs
    • New latching camera cable
    • Hardware expansion port, global shutter upgrade-compatible (coming soon)
    • Variable speed fan
    • Dedicated EEPROM Storage for camera calibration
    • Qwiic support
       

    Support:
    If you experience issues with your Limelight 3 please visit limelightvision.io. Click on the three lines on the top left of the screen, click on CONTACT, and then complete the form. The wonderful Limelight folks will then work directly with you on your difficulties.

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Updates From Limelight 2+ to 3:

    • 30% Smaller
    • Low-latency, sensor-limited retro-reflective tracking improvements: 
      • 480p at 90fps
      • 960p at 40fps
      • 720p at 40fps
      • 2592x1944 (5 megapixels) at 13-15fps
    • Zero-Code AprilTag tracking
    • Zero-Code robot localization with AprilTags and Limelight MegaTag
    • Zero-Code neural network inference with Google Coral
    • Learn and build on your own with custom, full python vision pipelines
    • Significantly improved thermal performance
    • 5.0Gbps USB 3.0 for low-latency Google Coral acceleration
    • Gigabit Ethernet
    • 15-second boot time
    • Impact-resistant illumination LED board mount to prevent broken LEDs
    • New latching camera cable
    • Hardware expansion port, global shutter upgrade-compatible (coming soon)
    • Variable speed fan
    • Dedicated EEPROM Storage for camera calibration
    • Qwiic support
       

    Support:
    If you experience issues with your Limelight 3 please visit limelightvision.io. Click on the three lines on the top left of the screen, click on CONTACT, and then complete the form. The wonderful Limelight folks will then work directly with you on your difficulties.

    Customers who bought this item also bought

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (148 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the PRO-CRIMP Crimp Tool (am-3326).

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    574 ml Air Reservoir with Push Connect Fittings

    #am-2649
    $30.00
    (23 In stock)

    This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

    This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

    Specifications:

    • Manufacturer: Clippard
    • Weight: 0.64 lbs
    • Capacity: 574 ml (35 cu. inch)
    • Ports: Two 1/4" od tube push-in fittings
    • Maximum pressure: 125 psig
    • Temperature rating: 35 to 100 F
    • Length: 12.25"
    • Diameter: 2.5" (@ main tank), 2.75" max


    A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

    Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).

    12 gauge red black bonded wire, 25ft length

    #am-0904
    $45.00
    (In stock)

    This is 12 GA bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.

     

    If you are looking for a much more flexible wire or wire that is not bonded check out our Silicone Wire
     

    * - This is also known as zip cord or zip wire.

     

    Specifications

    • Gauge: 12 AWG
    • Length: 25 feet
    • Total Weight: 1.2 lbs
    • Weight: 0.05 lbs/ft
    • Wire Jacketing: black & red (bonded together)

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    Compact Splice Connector, 2-pole, Qty 10

    #am-2575a
    $14.50
    (In stock)

    Every millimeter counts in electrical installations: Building technology requires more and more functions integrated into ever smaller spaces. This connector accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allows you to connect different types of wires and enables bridging of wires with greatly differing cross sections.

    Blue Nitrile Roughtop Tread 1.5 in. Wide 10 ft. Long

    #am-4206
    $60.00
    (4 In stock)

    Everyone knows, Blue Nitrile Roughtop Tread is the best tread in the competitive robotics marketplace. This tread is the magic behind many top-performing robots. This tread is a ground-breaking 1.5 inches wide to fit wider profile wheels like our 1.5 inch wide XL Performance Wheels. Or, use this on your own custom wheels - now you don't have to custom-cut tread for your custom wheels!