The 770M Premium Package build on the Standard Package by boosting performance with an automatic tool changer, active probe, and electronic tool setter, you’ll be CNC milling in style with your very own 770M.

Includes:

770M Mill

770M Machine Owner's Kit

770MX / 770M Stand

770M Chip Tray

Manual Oil Pump

770M Enclosure Kit

PathPilot Controller - Rev. C

Touch Screen Kit

Waterproof Mouse

Waterproof Mini-Keyboard

Jog Shuttle Controller

Controller Arm

Power Drawbar Kit for 1100M / 770M

Automatic Tool Changer for the 770M

Passive Probe Kit

Electronic Tool Setter

5 in. (127 mm) CNC Vise

End Mill Kit for Aluminum #1

TTS™ CNC Operator Set with Tormach Tool Assistant

Lifting Bar Kit

FogBuster Coolant Kit (115 Vac) for 770M/770MX

DuraKut 9000B Mist Coolant

Machine Way Oil (1 Gallon)

The xsTECH Router is a desktop CNC ready to use out of the box. It's small enough to fit in a craftroom or makerspace, and it's capable enough to cuts all manners of plastics, woods, and even aluminum.

The see-through enclosure offers safe use and controls dust that can muck up your space and electronics.

This product is evaluated to the Model Code SPE-1000 and is ESA/CSA approved according to National Standards, for use in Canada when purchased through Studica.

DOWNLOAD TECHNICAL SPECIFICATIONS

Take the 8L Deluxe Package and move on up with the newly-designed 8L PathPilot Operator Console, and the 8L machine stand coolant kit. You’ve got everything needed to face, turn, bore, and groove. Plus you can cut it off and do it all over again. Ready to start cutting?

he 8L is a native 5C lathe that offers a 1.5 HP (1.11 kW) spindle that runs at 180-5000 RPM. It comes with a fully assembled enclosure as part of the base model. The footprint remains small, ringing in at 26 in. x 50 in., and the lathe itself is attached to a hand-scraped 140 pound cast base.

• Motor: 1.5 HP Single-Phase
• Swing over bed: 8 in.
• Swing over carriage: 4 in.
• Distance between centers: 15 in.
• Spindle bore: 1.25 in.
• Spindle type: 5C
• Speeds: 180-5000 RPM
• Tailstock taper: MT2
• Tailstock barrel travel: 2.2 in.
• Shipping weight: 1000 lbs.

What's Included?

• 8L Lathe
• 8L Lathe Stand
• 8L Lathe PathPilot Operator Console
• Machine Owner's Kit
• Waterproof Mini-Keyboard
• Waterproof Mouse
• 0XA Tool Holder Kit for 8L
• Deluxe Professional Lathe Tool Kit
• 4 in. Precision 3-Jaw Chuck (5C Mount)

Note: This item will incur additional freight charges that will be quoted.

Introduce students to more than 250 different measurements with the manipulatives and lessons in the Measurement Math Training Kit. Use these manipulatives with various rulers, including tape measures and calipers. Train and test their measurement math skills through a comprehensive curriculum, student workbooks, and hands-on activities. Additionally, students have access to interactive online lessons to reinforce knowledge.

Contents

• 5 sets which each include
  • 5 measurement tools
  • Ruler
  • Storage case
• Workbooks (20-pack)
• Online access to curriculum
• Student access to online lessons and activities
• 1-year limited warranty

Use this comprehensive Leadership Soft Skills Program as a standalone course or to supplement a current program. Teach 18 different leadership soft skills, from conflict management and honesty to team building and positivity.

The program includes a teacher guide, 20 student workbooks, a slide presentation, and 18 scenario cards.

Contents

• 18-lesson teacher guide
• Set of 20 student workbooks
• 18 Career-Ready Workplace Scenario Cards
• 88 presentation slides

Curriculum

The 18-lesson Leadership Soft Skills Program curriculum was designed to help participants learn and apply key soft skills needed for the workforce. Curriculum contents include:

• Teacher guide
• Set of 20 student workbooks
• 18 Career-Ready Workplace Scenario Cards
• 88 presentation slides
• Pre and Post-Summative Assessment

​Specifications

• Teacher guide: 8.5 x 11 inches, 88 pages
• Student workbook: 8.5 x 11 inches, 98 pages
• Scenario cards: 5.5 x 8.5 inches, 20 cards

The 1100M Premium Package build on the Standard Package by boosting performance with an automatic tool changer, active probe, and electronic tool setter, you’ll be CNC milling in style with your very own 1100M.

Includes:

Tormach 1100M - Compact 3-Axis CNC mill with PathPilot controller

TTS Adapter Collet: R8

1100M Machine Owner's Kit

1100M / 1100MX Stand

1100M Chip Tray

Manual Oil Pump

1100M Enclosure Kit

Lifting Bar Kit

Machine Way Oil (1 Gallon)

FogBuster Coolant Kit (230 Vac) for 1100M/1100MX

DuraKut 9000B Mist Coolant

PathPilot Controller - Rev. C

Touch Screen Kit

Waterproof Mouse

Waterproof Mini-Keyboard

Jog Shuttle Controller

Controller Arm

Power Drawbar Kit for 1100M / 770M

Automatic Tool Changer for the 1100M

Passive Probe Kit

Electronic Tool Setter

5 in. (127 mm) CNC Vise

TTS™ CNC Operator Set with Tormach Tool Assistant

End Mill Kit for Aluminum #1

How do you conduct a bend test? How do you qualify a bend-tested weld? Why is such knowledge important to potential employers? Answer these questions and more with the RealCareer Bend Tester and curriculum. Designed with education in mind, this 8-ton hydraulic, manual-guided bend test fixture allows educators to conduct destructive weld testing in a classroom or welding lab. Comprehensive curriculum, classroom posters and supporting materials are included.

Additional Shipping Info.

NOTE: This product ships fully assembled on a pallet and requires a shipping dock. If you do not have a dock available, the order will need to incur an additional $125 fee for a lift gate truck. Please select the lift gate option for you organization.

Take the PCNC 440 Starter Package, add the convenience of a power drawbar, safety and cleanliness of an enclosure, chip clearing via flood coolant, and the TTS™ CNC Operator Set.

Includes:

• PCNC 440 Mill
• Machine Owner's Kit for PCNC 440
• PCNC 440 Stand
• PCNC 440 Chip Pan
• PCNC 440 Enclosure Kit
• Machine Way Oil (1 Gallon)
• PathPilot Controller for 15L Lathe and PCNC Mills
• Standard LCD Monitor
• Waterproof Mini-Keyboard
• Jog Shuttle Controller
• Waterproof Mouse
• Controller Arm
• Flood Coolant Kit for PCNC 440
• QualiChem XTREME CUT 251C
• PCNC 440 Power Drawbar Kit
• 4 in. CNC Vise
• Clamp Kit for 3/8 in. T-Slots (58 Pcs.)
• TTS™ CNC Operator Set with Tormach Tool Assistant
• Cutting Tool Starter Set #2

Note: This item will incur additional freight charges that will be quoted.

Implementing the guideWELD^® VR welding simulator enables users to refine basic welding skills. They also learn proper welding techniques and explore welding career paths while saving on costly consumables. The welding simulator provides immediate feedback on work angle, travel angle, speed, nozzle-to-plate distance, and straightness.

Contents

Hardware:

• guideWELD VR workstation with interchangeable GMAW (MIG) and/or SMAW (Stick) welding simulator gun
• 3 welding joints (tee, lap, butt)
• Actual Welding gloves included
• Online access to: guideWELD VR curriculum (3 units, 13 lessons – over 25 hours of curriculum and assessment), Administrator Guide, Instructor User Guide, Student User Guide, Quick Start Guide, Product software

*Welding helmet not included

Software:

• Online access to download
• Download directly to a server or individual computers

Use the curriculum and models in our Common Welding Joints Kit to teach students how to identify the most common welding joints. Each 10-piece kit includes both SMAW and GMAW coupon examples made of lightweight plastic. The included flashcards and curriculum address joint types, proper welding techniques and how to prevent welding issues.

Teach welding students how to identify and correct common weld defects with the portable, lightweight RealCareer™ Weld Defects Kit. It contains 13 plastic models, depicting 12 of the most common welding defects as well as one quality weld. Use this engaging, hands-on teaching tool and curriculum to help your students understand how weld defects occur. Also, enable them to address these defects by correcting both their machine and their technique.

Contents

• 1 quality weld model
• 12 weld defect models
• Welding Defect Definition insert
• Instructor Guide
• Case
• Curriculum (online access)
• 10 sets of student flash cards
• 5 classroom posters
• 1-year limited warranty

The RealCareer Employability Skills Program is an engaging, easy-to-implement program that uses hands-on activities and real-world applications to teach students 20 soft skills, from communication and interpersonal skills to time management and responsibility.

Use the program to:

• Supplement existing employability skills program
• Teach a complete unit on employability skills
• Generate real-life discussions
• Prompt reflection activities like journal-writing
• Generate ice-breaker activities

Target Audience:

• High school students
• Post-secondary students
• Workforce development programs