Tetrix Prime 6mm(ID) x 9mm(L) Bronze Bushings keep things running smoothly on your robotic creation. Sized for the Tetrix Prime; system, these 9 mm by 6 mm bronze bushings are lightly lubricated to reduce friction on axles.

• Weight: 1.4 grams per bushing
• Quantity: pkg of 12
• Material: SAE 841 Bronze
• Nominal Size: 9 mm OD x 6 mm ID x 9 mm L

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

Tetrix Prime Beam Attachment Hub can be used to attach a 6 mm shaft through an aluminum beam to form a pivot. Made of acetal plastic. Requires Tetrix Prime; Thumbscrews and Socket Head Cap Screws, sold separately.

• Weight: 6.9 grams per hub
• Quantity: pkg of 2
• Material: Molded acetal
• Nominal Size: 32 mm x 19 mm x 18 mm

TETRIX MAX Single Standard-Scale Servo Motor Brackets are heavy-duty aluminum brackets. Each holds one servo in place.

• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime 6MM D-Shaft Set Collars are used to hold a rotating axle in horizontal alignment when constructing pivot joints. Made of acetal plastic; requires Socket Head Cap Screws (sold separately).

• Weight: 2.4 grams per collar
• Quantity: pkg of 2
• Material: Molded acetal
• Nominal Size: 19 mm diameter x 8 mm thick

TETRIX MAX Flat Brackets are perfect for connecting structural elements or for creating a servo leverage arm. Made of heavy-duty aluminum.

• Quantity: pkg of 2
• Nominal Size: 91 mm x 27 mm
• Material: 7005 Aluminum

Tetrix Prime 6MM Shaft Servo Hub allows you to attach servos to 6 mm axles using this shaft hub. Made of durable acetal plastic.

• Weight: 3.4 grams per hub
• Material: Molded acetal
• Nominal Size: 16 mm diameter x 17 mm

TETRIX MAX L Brackets feaure 90º angles to connect structural elements. Made of heavy-duty aluminum.

• Quantity: pkg of 2
• Nominal Size: 27 mm x 31.5 mm x 31.5 mm
• Material: 7005 Aluminum

Tetrix Prime Servo Mounting Bracket makes adding servos to Tetrix Prime; quick and easy. Made of acetal plastic, each mount holds one servo in place.

• Weight: 10 grams per mount
• Material: Molded acetal
• Nominal Size: 54 mm x 24 mm x 31 mm

32MM Channels&nbspcan be cut to custom lengths with a metal-cutting blade.

• Size: 32 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime Gripper Kit enables you to build a gripper for your Tetrix Prime; robot. After it is built, the gripper can easily be added to a robot, using a thumbscrew and wing nut. Gripper jaws open to 63 mm to pick up objects. Comes with necessary hardware and screws. Requires assembly and a standard servo, sold separately.

• Weight: 33.9 per gripper

96MM Channel is a structual base for building with the Building System. It can also be cut to custom lengths with a metal-cutting blade.

• Size: 96 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime; 6 V NiMH Battery Pack is a five-cell, six-volt, 1,500 mAh rechargeable battery pack, which brings long-lasting power to Tetrix Prime; motors and electronics.

• Type: NiMH rechargeable Battery Pack
• Note: Compatible with the Tetrix Prime; 6-Volt motors and electronics.
• Weight: 132.9 grams per battery pack

160mm Channel  can also be cut to custom lengths with a metal-cutting blade.

• Size: 160 mm x 32 mm x 32 mm
• Material: 7005 Aluminum

Tetrix Prime; Battery Mount Bracket makes it easy to mount battery packs to your robotic designs. Features two heavy-duty plastic clips that are used together with a bungee band to tie down the Tetrix Prime; Battery Pack. An extra band is included.

• Quantity: pkg of 2
• Material: ABS plastic
• Nominal Size: 70 mm x 16 mm x 23 mm
• Weight: 9.9 grams per bracket

288mm Channel are heavy-duty aluminum channel pieces that can be cut to custom lengths with a metal-cutting blade.

• Size: 288 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime Beam Extension Connectors bring together two square aluminum beams end to end without adding any space between. Made of ABS plastic; requires Quick Rivets and Pegs or Thumbscrews and Wing Nuts (all sold separately).

• Quantity: pkg of 2
• Material: ABS plastic
• Nominal Size: 13 mm x 17 mm x 64 mm
• Weight: 4.6 grams per connector

416MM Channel is a heavy-duty aluminum channel piece that serves as the structural base for building with the TETRIX Building System. This piece can also be cut to custom lengths with a metal-cutting blade.

• Size: 416 mm x 32 mm x 32 mm
• Quantity: One Channel
• Material: 7005 Aluminum

Tetrix Prime; 6-32 x 23.5mm Thumbscrews are used in conjunction with the Tetrix Prime; Wing Nuts to securely fasten PRIME components. 

• Quantity: pkg of 25
• Material: 18-8 Stainless steel, knurled nylon cap
• Size: 6-32 fully threaded x 23.5 mm
• Tools Required: 7/64" hex driver
• Weight: 2.1 grams per thumbscrew

TETRIX MAX Flat Bars are 288 mm long and made of heavy-duty aluminum. These bars can also be cut to custom lengths with a metal-cutting blade.

• Dimensions: 288 mm x 16 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime Miniature Ball-point HEX Driver is a great tool for securing the Tetrix Prime; Thumbscrews and Socket Head Cap Screws. 6" blade length. 7/64" hex size.

Angle Pack are structural pieces featuring 90º angles and heavy-duty aluminum construction. Can be cut to custom lengths with a metal-cutting blade.

• Dimensions: 288 mm x 16 mm x 16 mm
• Material: 7005 Aluminum

144mm Angle Beam features structural pieces with 90º angles and heavy-duty aluminum construction. Can be cut to custom lengths with a metal-cutting blade.

• Quantity: pkg of 2
• Material: 7005 Aluminum

Keep your robots rolling! Use this as a replacement or an extra charger for the 6 V NiMH battery pack that comes with Tetrix Prime; sets.

TETRIX MAX Flat Building Plates are 64 mm x 192 mm and made of heavy-duty aluminum. Can be cut to custom lengths with a metal-cutting blade.

• Size: 64 mm x 192 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime JR Switch On/Off controls the power between the battery pack and the receiver. 

• Note: Use with the Tetrix Prime; 6 V Battery Pack and Receiver, sold separately
• Weight: 8.5 grams per switch

80MM Tube is both light and strong. TETRIX Tubes can be used as long extensions. Made of heavy-duty aluminum, they can also be cut to custom lengths with a metal-cutting blade.

• Length: 80 mm
• Outside Diameter: 15.7 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Tetrix Prime 6-32 Socket Head Cap Screws 5/16" secure rotating axle-mounted elements in place. Requires 7/64" hex driver included in Starter Set. 

• Weight: 0.9 grams per screw
• Quantity: pkg of 25
• Size: 6-32
• Length: 5/16"

145MM Tube Pack is light and strong with tubes that can be used as long extensions. Made of heavy-duty aluminum, they can also be cut to custom lengths with a metal-cutting blade.

• Length: 145 mm
• Outside Diameter: 15.7 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Great for when you’ve bought extra Tetrix Prime; parts and want uniform bins to store them in. Includes 11-1/8" x 17" lid.

Light and strong, the TETRIX Tubes can be used as long extensions. Made of heavy-duty aluminum, they come in three different sizes but can also be cut to custom lengths with a metal-cutting blade.

The TETRIX PRIME Class Pack serves 12 teams of two students, offering each pair of students their own Tetrix Prime; R/C Starter Set to work with. Using the sets and the instructions from the included builder’s guide, students work collaboratively to engineer fully functioning, remote-controlled robots.

Includes:

• 12 Tetrix Prime; R/C Starter Sets each containing:
  • 298 building elements plus Gripper Kit
  • Gamepad-style, four-channel wireless controller
  • 4 servo motors (2 standard and 2 continuous rotation)
  • Rechargeable battery pack and charger
  • On/off switch and assembly tools
  • Printed setup and builder’s guides along with activity accessories

TETRIX MAX Tube Clamps are used to bolt TETRIX Tubes to structural elements. They feature heavy-duty aluminum construction.

• Quantity: pkg of 2
• Material: 7005 Aluminum

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

TETRIX MAX Motor Shaft Hubs attaches wheels and gears to motor shafts. Each hub comes with a screw and is made of heavy-duty aluminum.

• Quantity: pkg of 2
• Size: 6 mm
• Material: 7005 Aluminum
• Note: Includes 10-32 set screw

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

Tetrix Max Servo Extension gives your servo a little more room to roam with this extension.

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

Tetrix Max Servo Y Connector connects two servos to one channel.

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

120T Gear is a step above kits and systems with plastic gears. These are made of heavy-duty aluminum and really stand up to wear and tear.

• Quantity: one gear
• Number of Teeth: 120
• Outside Diameter: 97.3 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

80T Gear is a step above kits and systems with plastic gears – it is made of heavy-duty aluminum and really stands up to wear and tear. 

• Quantity: one gear
• Number of Teeth: 80
• Outside Diameter: 65.5 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

Specifications

• Quantity: pkg of 6
• Length: 100 mm
• Diameter: 4.7 mm
• Weight: 81 g per pack; 12.7 g per axle
• Size: 4.7 mm x 100 mm
• Material: 303/304 stainless steel
• Shaft: D-shaft

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

TETRIX MAX Motor Mount Pack attaches the DC Drive Motor to your robot. Includes the Motor Mount, two kep nuts, and two cap screws.

• Nominal Size: 72 mm x 12.7 mm
• Material: 7005 Aluminum

Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components.