Close
Main Categories
    Filters
    Preferences
    Search

    Plates

    Plates

    View as Grid List
    Sort by
    Display per page

    S3, 64mm Pulley Plate

    #am-3686-64
    $6.15
    (In stock)

    The 64mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3728 (coming soon). 

    It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. There are three different bolt circles where you can attach standoffs. The different bolt circles can form different diameter pulleys from 32mm to 64mm. The outside diameter of this plate matches the root diameter of a 40 Tooth Ninja Star Sprocket (am-3285). This allows it to be used as an idler chain guide.

    Specifications:

    • Material: 5052 Aluminum
    • Weight: 0.058 Pounds
    • Thickness: 2.29mm (0.09")
    • Diameter: 3.053"
    • Bore: 8mm
    • Holes:
      • 12 holes 0.150" in diameter on a 64mm (2.50") bolt circle
      • 6 holes, 0.150" in diameter on a 48mm (1.89") bolt circle
      • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
      • 4 holes, 0.150" in diameter on a 0.770" bolt circle
      • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle

    DeCIMate Output Plate (am-3692)

    #am-3692
    $33.83
    (In stock)

    This output plate forms the structure of the DeCIMate Gearbox (am-3745) along with the DeCIMate Motor Plate (am-3693). This plate mimics the mounting features of a CIM motor meaning anywhere you could mount a CIM, there too the DeCIMate can go.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 0.25 in.
    • Length: 2.5 in.
    • Height: 2.5 in.
    • Weight: 0.089
    • Finish: Anodized Red

    DeCIMate Motor Plate (am-3693)

    #am-3693
    $18.45
    (In stock)

    This motor plate accepts one or two AndyMark 775 RedLine Motors (am-3775) for use in a DeCIMate Gearbox (am-3745). This plate forms the structure of the DeCIMate gearbox along with the Output Plate for DeCIMate (am-3692).

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 0.25 in.
    • Length: 2.9 in.
    • Height: 1.5 in.
    • Weight: 0.06
    • Finish: Anodized Red

    0.875"Bearing Plate (am-3721)

    #am-3721
    $9.95
    (9 In stock)

    This bearing plate is a great way to mount a 0.875 in. OD (FR6) bearing into thin or weak material that otherwise could not tolerate or support a press-fit.

    Specifications:

    • Material: 5052 Aluminum
    • Bore: Press fit for FR6 bearing
    • Thickness: 0.125 in.
    • Bolt Pattern: 4x clearance for #10-32 on 2.00 in. circle
    • Length: 1.875 in.
    • Width: 1.875 in.
    • Weight: 0.032 Pounds

    Small Bearing Plate for 2x1 Elevator

    #am-3793
    $6.15
    (In stock)

    This bracket is a main structural component of the 2x1 Single Stage Elevator Bearing Kit (am-3779). This plate mounts to a carriage and a Large Bearing Plate to hold bearings, translating the load from the carriage to the uprights in a lift system.

    Specifications:

    • Material: 5052 Aluminum
    • Material Thickness: 0.125 in.
    • Weight: 0.06 Pounds

    Large Bearing Plate for 2x1 Elevator

    #am-3794
    $10.76
    (In stock)
    The main structural component of the Elevator Bearing Kit.

    AM14U Family Vertical Battery Mount C Plate

    #am-3958
    $21.53
    (In stock)


    This is the upper sheet metal part for the AM14U Family Vertical Battery Mount (am-3964). It surrounds the battery and has a tab to bolt either the SB120 or SB50 robot side battery connector.

    Specifications

    • Height: 2.00 in.
    • Length: 5.41 in.
    • Material: 5052 Aluminum
    • Width: 4.22 in.

    AM14U Family Vertical Battery Mount Bottom Plate

    #am-3959
    $19.99
    (In stock)


    This sheet metal part forms the bottom tray that supports the weight of the battery in the AM14U Family Vertical Battery Mount Kit (am-3964). It has a tab at the bottom that prevents the battery from shifting.

    Specifications

    • Depth: 0.13 in.
    • Height: 2.056 in.
    • Length: 7.00 in.
    • Material: 5052 Aluminum
    • Width: 6.00 in.

    AM14U4 Cross Plate

    #am-3974
    $43.05
    (In stock)


    The cross bracket is used to strengthen the AM14U4 frame to accomodate for a opening in the front or back of the chassis frame.

    Specifications

    • Height: 2.935"
    • Length: 24"
    • Material: 5052 Aluminum
    • Overall Width: 2.5"
    • Thickness: 0.125"
    • Weight: 1.35 lbs

    Dremel 3D Idea Builder 3D40 Printer with Flex Plate

    #F0133D40BA
    $1990.00

    The Dremel Digilab 3D40 FLEX Idea Builder 3D printer is Dremel's best 3D printer for classroom use or to use at home. 3D printing beginners, teachers and students alike will appreciate the new removable flexible build plate that makes it quick and easy to remove finished parts after printing,