This is a pneumatic push-to-connect union tee fitting. All three of the ports are push-to-connect 1/4" fittings.

Specifications:

• Weight: 0.02 pounds
• Width: 1.66"
• Height: 1.10"
• Depth: 0.525"
• Material: Plastic body
• Ports: 1/4" push-to-connect fitting
• Pressure range: 0-150 psi

This pneumatic fittings kit is perfect for your first time using pneumatics or restocking your current supply. It contains many of the most commonly used fittings as well as a few extras that always come in handy when re-configuring or repairing.

Individual Components within this Bundle:

• four - straight, 1/4" press-in to 1/4" NPT
• six - straight, 1/4" press-in to 1/8" NPT
• twelve - elbow, flow control, 1/4" press-in, 1/8" NPT
• twelve - elbow, 1/4" press-in, 1/8" NPT
• four - union tee, three port 1/4" press-in
• two - 1/8" NPT hex head plug
• four - 1/4" - 1/8" NPT, hex nipple
• two - 1/8" NPT to 1/4"press-in, female bulkhead
• four - 1/8" NPT hex nipple
• two - 1/2" x 520"PTFE tape roll
• eight - elbow, 1/4" press-in to 1/4" NPT
• two - union tee, 1/8" NPT, 2 female mooports, 1 male port
• two - 1/4" NPT hex nipple
• two - 1/4" NPT hex head plug
• four - 1/4" press-in, Y
• four - 1/4" press-in (two), 1/8" NPT (one), Y
• two - cross, 1/8" NPT, 3 female ports, 1 male port
• two - 1/8" NPT male to 1/4" NPT female
• two - Flow Control, In-Line, 1/4" tube, press-in
• four - 1/8" NPT, 1/4" push-in, valve

This is a plastic bracket for mounting the Clippard Air Tank (am-2649).

If you plan to use this bracket to hold of these am-2649 tanks, we recommend using two brackets for each tank. 

Specifications:

• Weight: 0.066 pound
• Width: 3.14 inches
• Height: 2.65 inches
• Thickness: 0.75 inch
• Material: Plastic

For Pro Charging Systems, warranty replacements contact Richard Harmon. 

• Email: [email protected]

This is a miniature pressure gauge with 1/8 in. NPT threads perfect for lightweight pneumatic systems where you need to mount a pressure gauge to a hard fitting. This pressure gauge is significantly reduced in volume and weight compared to the classic gauges used in FRC. This lets you take advantage of every last cubic inch and ounce on your robot.

Specifications

• Height: 0.83 in
• Operating Pressure: 0-150 psi
• Port(s): 1/8 in. NPT
• Pressure Range : 0-116 psi
• Width: 0.59 in

This is a miniature pressure gauge with a male 1/4 in. push to connect fitting making it easy to install in any of our push to connect fittings to get exactily the layout you are looking for. It can even be installed in the end of one of our air tanks where you might usually put a plug. This pressure gauge is significantly reduced in volume and weight compared to the classic gauges used in FRC. This lets you take advantage of every last cubic inch and ounce on your robot.

Specifications

• Height: 1.5 in
• Operating Pressure: 0-150 psi
• Port(s): 1/4 in. Male Push In
• Pressure Range: 0-116 psi
• Width: 0.59 in

This pneumatic pressure gauge features a 1/8" NPT male fitting. This part is used to read the overall pressure for your pneumatic system.

Specifications:

• Weight: 0.144
• Width: 1.5" Diameter Face
• Total length: 1.5"
• Wrench needed for installation:
• Face color: White with Black Lettering
• Manufacturer: Marsh
• Capacity: 0-160 PSI
• Port:1/4" Male NPT

This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup.

Specifications:

• Weight: 0.09 Pounds
• Maximum Operating Pressure: 250 PSI
• Outlet Pressure Adjustment: 125 PSI
• Valve Type: Pop Safety
• Test Mechanism: Ring
• Material: Nickel-Plated Brass
• Operating temperature range: -15 to 250 degrees F
• Port size: 1/8 in. NPT Male

This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup.

Specifications

• Port: 1/8 NPT
• Pressure Range: 25 to 250 psi
• Relief Tolerance: +/- 3%
• Seat Leakage: Bubble Tight Within 10% for Set Pressure Greater Than 50 psi
• Weight: 0.064 lbs

Single solenoid pneumatic valve without fittings, manufactured by Mead Fluid Dynamics, Inc.

Mead part number: M4V210-06-12VDCFL
 

Three (3) straight 1/8 NPT fittings (or right angle 1/8 NPT fittings) are NOT INCLUDED with this part, but are needed to connect tubing to this valve.

Specifications

• Flow Rating: 0.78 Cv
• Maximum Pressure: 215 psi
• Maximum Response Time: 50ms
• Operating Pressure: 22 - 116 psi
• Pilot Air Supply: Internal
• Port(s): 1/8 in. NPT
• Size: 117mm x 67mm x 22mm
• Style: In-line, individual
• Valve Function: 5 Port-2 Position
• Voltage: 12Vdc
• Weight: 0.52 lbs

This is the ultimate step in our pneumatics packages. Plenty of extras for backup parts and multiple actuation. All while creating pressurized air in a safe, manageable manner for mobile robots.