This is a Gates HTD timing belt.

Specifications:

• Number of Teeth: 40
• Pitch Length: 7.87 inches
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1 lbs

Specifications:

• Number of Teeth: 45
• Pitch Length: 8.86 inches (225mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1

This is an HTD timing belt.

Specifications:

• Number of Teeth: 48
• Pitch Length: 9.44" (240mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1

This is an endless, spliced belt, designed to be a track drive component for a mobile robot. It's made of steel-reinforced urethane timing belt, with an abrasion-resistant blue nitrile roughtop tread. The center of the timing belt includes a "V" for tracking the belt to the center of a grooved pulley. We have pulleys (am-3298a) specially designed to drive this belt.

This belt is featured in the Rhino Track Drive Module (am-3322).

Specifications:

• Weight: 1.63 pounds
• Width: 2.01 inches
• Length: 65.5 inches, spliced endless loop
• Timing Belt Type: HV
• Timing Belt Material: Urethane
• Timing Belt Pitch: 0.5 inch
• Tread Material: Carbox Nitrile
• Tread Profile: Roughtop
• Timing Belt Reinforcement: Steel Cord
• Maximum Allowable Tension: 600 pounds

Specifications:

• Number of Teeth: 93
• Pitch Length: 18.31 inches (465mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD

Specifications:

• Flange diameter: 1.654"
• Outside Diameter: 1.459"
• Pitch Diameter: 1.504"
• Width: 0.276"
• Bore: 0.244"
• Bolt Pattern: 0.14" diameter holes, evenly spaced on a 0.770" diameter bolt circle
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.02 Pounds

Specifications:

• Flange diameter: 1.654"
• Outside Diameter: 1.459"
• Pitch Diameter: 1.504"
• Width: 0.276"
• Bore: 0.377" Hex
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.0295 Pounds

Specifications:

• Flange diameter: 1.654"
• Outside Diameter: 1.459"
• Pitch Diameter: 1.504"
• Width: 0.276"
• Bore: 0.50" Hex
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.0025 Pounds

If you need to increase the width of any of our 24 Tooth pullies, here is the solution! This pulley extension mates with existing pulley halves am-3401, am-3402, and am-3403. This pulley extension can be used in a variety of settings, such as a wider conveyor belt, multiple belt output, and much more by stacking multiple extenders back-to-back between our standard pulley halves. 

Specifications:

• Outside Diameter: 1.459" (at outer tooth edge)
• Pitch Diameter: 1.504"
• Width: 9mm
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.014 pounds

Specifications:

• Pitch: 5 mm
• Length: 520 mm (20.5 in.)
• Width: 15 mm (0.6 in)
• Number of Teeth: 104
• Weight: 0.069 Pounds

Specifications:

• Pitch: 5 mm
• Length: 755 mm (29.7 in.)
• Width: 15 mm (0.6 in)
• Number of Teeth: 151
• Weight: 0.1 Pounds

Specifications:

• Pitch: 5 mm
• Length:
• Width: 9 mm
• Number of Teeth: 48
• Weight: 0.05 Pounds

Specifications:

• Pitch: 5 mm
• Length: 535 mm (21.1 in.)
• Width: 15 mm (0.6 in)
• Number of Teeth: 85
• Weight: 0.071 Pounds

The 32mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3729 (coming soon). 

It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. The outside diameter of this plate matches the root diameter of a 24 Tooth Ninja Star Sprocket (am-3283). This allows it to be used as an idler chain guide.

Specifications:

• Material: 5052 Aluminum
• Weight: 0.019 Pounds
• Thickness: 2.29mm (0.09")
• Diameter: 1.782"
• Bore: 8mm
• Holes:
  • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
  • 4 holes, 0.150" in diameter on a 0.770" bolt circle
  • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle

The 64mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3728 (coming soon). 

It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. There are three different bolt circles where you can attach standoffs. The different bolt circles can form different diameter pulleys from 32mm to 64mm. The outside diameter of this plate matches the root diameter of a 40 Tooth Ninja Star Sprocket (am-3285). This allows it to be used as an idler chain guide.

Specifications:

• Material: 5052 Aluminum
• Weight: 0.058 Pounds
• Thickness: 2.29mm (0.09")
• Diameter: 3.053"
• Bore: 8mm
• Holes:
  • 12 holes 0.150" in diameter on a 64mm (2.50") bolt circle
  • 6 holes, 0.150" in diameter on a 48mm (1.89") bolt circle
  • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
  • 4 holes, 0.150" in diameter on a 0.770" bolt circle
  • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle

The 5mm Round Groove Belt is 3M long and has a 10% stretch. It is also referred to as a U Groove belt. 

• Material - Polyurethane
• Diameter - 5mm
• Length - 3m
• Color - Yellow
• Stretch factor - 10%
• Surface - smooth
• Solid core
• Open end