Pulleys & Belts
Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.
Specifications:
The XL series belt is compatible with the 6mm, 10 tooth XL pulley.
Specifications:
This 250 sprocket spacer can be used when chain needs more room from a mounted part. This spacer can also be used to mount our Pulley, 42 Tooth (am-2234) to our line of Plaction and Performance Wheels. This spacer is one of the many rigid parts that makes up the Rhino Track Drive Module (am-3322).
Specifications:
This is the 42 tooth pulley used in the AM14U family of chassis. It works with all 5 mm pitch HTD timing belts. This pulley has a 1.875 in. bolt circle making it easy to attach to many of our motion components. It also has a locking pattern that is compatible with many of our wheels.
This pulley comes as two identical halves that mesh with each other to create one pulley that is the correct width for a 15 mm timing belt.
Need to have two 15 mm belts on one pulley? Add in the 15 mm wide, 42 Tooth Pulley Extension (am-2813) and you can run two belts in two different directions.
This is a Gates HTD timing belt, manufacturer part number 800-5M-15
Usage: Axle Locations for AM14U Variations
Specifications:
Product Overview:
This is a Gates HTD timing belt, manufacturer part number 520-5M-15
Specifications:
Here is a 39 tooth HTD profile pulley, fitting any two 15 mm wide HTD timing belts. This is shipped as an un-assembled kit. The center bore accepts any flanged bearings with a 1.125 in. OD. It can also accept any of our legacy hubs listed here:
500EX Hex Hub am-2568
500EX Key Hub am-0976
625 Key Hub am-0214a
10 mm Key Hub am-0985a
10 mm DD Bore Hub am-2279
0.375 in. Hex Hub am-2231b
This is a Gates HTD timing belt, manufacturer part number 850-5M-15
Usage: Axle Locations for AM14U Variations
Specifications:
This is a Gates HTD timing belt, manufacturer part number 655-5m-15
Usage:
Axle Locations for AM14U Variations (.pdf)
Specifications:
This is a Gates HTD timing belt, manufacturer part number 585-5M-15. This belt is used in the AM-14U-CS and AM-14U-8W as one of the two belts to connect an eight wheel drive.
Specifications:
This is a Gates HTD timing belt, manufacturer part number 425-5M-15
Product Overview:
This is a Gates HTD timing belt, manufacturer part number 600-5M-15
Usage:
Axle Locations for AM14U Variations
Specifications:
Product Overview:
This is a Gates HTD timing belt, manufacturer part number 535-5M-15
Usage:
Axle Locations for AM14U Variations
Specifications:
This is a Gates HTD timing belt, manufacturer part number 755-5M-15
Usage:
Specifications:
If you need to increase the width of our 42 Tooth pulley, here is the solution! This pulley extension mates with existing pulley halves (am-2234). This pulley extension can be used in a variety of settings, such as a wider conveyor belt, multiple belt output, and much more by stacking multiple extenders back-to-back between our standard pulley halves.
Specifications:
This 30 tooth pulley has a 5/16" bore and can be used with 5mm HTD belts.
Specifications: