Robotics
The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Flat Bracket is a very strong 3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
This is a 15 Degree Bracket used in the Ramp.
Specifications:
160mm Channel can also be cut to custom lengths with a metal-cutting blade.
This is 18 AWG (gauge) bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.
* - This is also known as zip cord or zip wire.
The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Flat Bracket is a very strong 3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica 192mm x 96mm Flat Bracket is a very strong 3mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.
Product Usage:
Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.
Layout Print(s)
am-3664 2in 5mm Hex Stealth Wheel REV4.PDF
am-3156 2IN 8mm Stealth Wheel REV3.PDF
am-3436 2in 375Hex Stealth Wheel REV3.PDF
am-3155 2in 500Hex Stealth Wheel REV3.PDF
am-3665 4in 5mm Hex Stealth Wheel REV3.PDF
am-2648 4IN 8mm Stealth Wheel REV5.PDF
am-3435 4in 375Hex Stealth Wheel REV3.PDF
am-2647 4in 500Hex Stealth Wheel REV3.PDF
CAD File(s)
am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP
am-3156 2IN 8mm Stealth Wheel.STEP
am-3436 2IN 375Hex Stealth Wheel REV2.STEP
am-3155 2IN 500Hex Stealth Wheel REV2.STEP
am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP
am-2647 4inWheel 500 Hex REV2.STEP
am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP
The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.
Product Usage:
Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.
Layout Print(s)
am-3664 2in 5mm Hex Stealth Wheel REV4.PDF
am-3156 2IN 8mm Stealth Wheel REV3.PDF
am-3436 2in 375Hex Stealth Wheel REV3.PDF
am-3155 2in 500Hex Stealth Wheel REV3.PDF
am-3665 4in 5mm Hex Stealth Wheel REV3.PDF
am-2648 4IN 8mm Stealth Wheel REV5.PDF
am-3435 4in 375Hex Stealth Wheel REV3.PDF
am-2647 4in 500Hex Stealth Wheel REV3.PDF
CAD File(s)
am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP
am-3156 2IN 8mm Stealth Wheel.STEP
am-3436 2IN 375Hex Stealth Wheel REV2.STEP
am-3155 2IN 500Hex Stealth Wheel REV2.STEP
am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP
am-2647 4inWheel 500 Hex REV2.STEP
am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP
The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.
Product Usage:
Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.
Layout Print(s)
am-3664 2in 5mm Hex Stealth Wheel REV4.PDF
am-3156 2IN 8mm Stealth Wheel REV3.PDF
am-3436 2in 375Hex Stealth Wheel REV3.PDF
am-3155 2in 500Hex Stealth Wheel REV3.PDF
am-3665 4in 5mm Hex Stealth Wheel REV3.PDF
am-2648 4IN 8mm Stealth Wheel REV5.PDF
am-3435 4in 375Hex Stealth Wheel REV3.PDF
am-2647 4in 500Hex Stealth Wheel REV3.PDF
CAD File(s)
am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP
am-3156 2IN 8mm Stealth Wheel.STEP
am-3436 2IN 375Hex Stealth Wheel REV2.STEP
am-3155 2IN 500Hex Stealth Wheel REV2.STEP
am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP
am-2647 4inWheel 500 Hex REV2.STEP
am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP