Close
Main Categories
    Filters
    Preferences
    Search

    Robotics

    Robotics

    View as Grid List
    Sort by
    Display per page

    #6-32 x 1.25" Head Head - Min 25

    #am-1437
    $0.23
    (In stock)

    These 6-32 1.25" Hex Head Machine Screw can be used for fastening Nubs to other motion products.

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 6-32
    • Length: 1.25"
    • Head: Hex
    • Weight: 0.0045 lbs

    #8-15 x 0.625" Pan Head Phillips - Min 25

    #am-1291
    $0.31
    (In stock)

    These screws are used within the FIRST STEAMWORKS? Gear. The FIRST STEAMWORKS? Gear uses 20 screws for assembly. This screw is available in quantities of 25, giving you a few extras when assembling.

    Specifications:

    • Diameter: #8
    • Diameter - Thread Size: #8 - 15
    • Drive: Phillips
    • Drive Size: #2
    • Finish: Zinc
    • Head: Pan
    • Length: 5/8"
    • Material: Steel

    0.118 in. Thick 24 in. x 24 in. Polycarbonate Sheet

    #am-0980
    $35.00
    (3 In stock)

    This is a single sheet of 1/8 inch thick polycarbonate (PC) plastic, cut to a 24x24 inch square. This single sheet of PC will be shipped with the protective covering on both sides of the plastic sheet. 

    Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon).

    This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.

    Specifications:

    • Weight: 2.9 pounds
    • Width: 24 inches
    • Length: 24 inches
    • Material thickness: 0.118 inch
    • Material: Clear Polycarbonate

    0.280" long, 0.518" od, 0.382" id, Spacer

    #am-1306
    $0.90
    (In stock)

    Nylon Spacer

    Specifications:

    • Material: White Nylon Plastic
    • Length: 0.280"
    • Inside Diameter: 0.382"
    • Outside Diameter: 0.518"
    • Weight: < 0.001 pounds

    0.344" ID, 0.688" OD, 1/8" thick, brass Washer

    #am-1322
    $4.50
    (In stock)

    Specifications:

     

    • Bolt Size: 5/16"
    • Finish: Plain
    • Inner Diameter: 0.344"
    • Material: Brass
    • Nominal Thickness: 0.125"
    • Outer Diameter: 0.688"

    0.375"Aluminum Hex Stock 1 Foot (am-3807-1)

    #am-3807-1
    $10.00
    (In stock)

    This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.

     

    Specifications

    • Length: You specify
    • Material: 7075-T6 Aluminum
    • Weight: 0.25 lbs/ft
    • Width: 0.375 in. Hex

    0.5 in. Hex Hub

    #am-2568
    $15.38
    (23 In stock)

    This is the "500EX Hex Hub" the bore is a 1/2" Hex Hole. It is a slightly different version of the 500 Hex Hub. It is manufactured differently, as it is extruded. Also, there is a 1.124" diameter boss on each side of the hub flange, providing a location for 1.125" bore flat sprockets. Are you having a hard time keeping your sprocket concentric with your hub? This hub is the trick.

    This is the hub featured in the 2014 and 2015 Kit of Parts Drive Chassis and fits all AndyMark wheels. 

    Specifications:

    • Material: 6063 Aluminum
    • Bore: 1/2" Hex
    • Bolt Pattern: 0.204" diameter holes, evenly spaced on a 1.875" diameter bolt circle
    • Outside diameter: 2.25"
    • Weight: .088

    0.5 in. Round Thin Line Collar Clamp

    #am-3792
    $6.92
    (17 In stock)

    This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment.

    Specifications:

    • Material: 2024 Aluminum
    • Bore: 0.500 in.
    • Outside Diameter: 0.984 in.
    • Thickness: 0.236 in.
    • Weight: 0.017 Pounds
    • Clamping Screws: M2 5x8 SHCS

    0.5 inch Hex Aluminum Spacer Stock 1.2 inch length

    #am-3896-1200
    $3.50
    (14 In stock)

    Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

    0.5 inch Hex Aluminum Spacer Stock 12 inch length

    #am-3896-1
    $14.00
    (22 In stock)

    Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

    0.5 inch Hex Aluminum Spacer Stock 36 inch length

    #am-3896-3
    $23.00
    (In stock)

    Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

    0.5 inch Hex Aluminum Spacer Stock 72 inch length

    #am-3896-6
    $45.00
    (0 In stock)

    Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

    0.5"Hex Adapter Shaft for Bosch Motor

    #am-3723
    $15.38
    (In stock)

    This is an adapter to convert the female spline output of the Bosch Seat Motor (am-3493) to a 2 inch long 0.5 inch hex shaft. The square end interfaces with the female spline of the motor and is retained by an included 6-32 screw and washer. Our testing shows that in a back-drive situation the worm gear in the gearbox will fail before the motor spline or this adapter. 

    Specifications: 

    • Overall Length: 3.014 in.
    • Hex Length: 2.0 in.
    • Hex Width: 0.5 in.
    • Square Width: 0.23 in.
    • Weight: 0.126 Pounds
    • Material: 4140 Steel

    Included Hardware:

    • 1 - 6-32 x 0.5 in. Hex Head Machine Screw - (Sold in a Bulk Qty as am-1436)
    • 1 - #6 x 0.375" OD Flat Washer

    0.50 in. Hex and Keyed Shaft Coupling

    #AM-1560
    $25.00
    (15 In stock)

    Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!

    Shaft Compatability

    This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.

    0.50 in. Hex to 0.375 in. Hex Adapter

    #am-3832
    $12.30
    (In stock)

    This lightweight aluminum adapter allows conversion of 0.375 inch hex shafts into 0.500 inch hex shafts or 0.500 inch hex holes into 0.375 inch hex holes. This component is not recommended for extremely high torque applications.

    Specifications:

    • Material: 6061 Aluminum
    • OD: 0.499 in. Hex
    • ID: 0.376 in. Hex
    • Length: 0.50 in.
    • Weight: 0.004 Pounds

    0.82" x 3/8" Spacer

    #am-2243
    $2.31
    (In stock)

    This is a 0.82 inch long brass spacer which fits over a 3/8" shaft.

    Specifications:

    • Length: 0.82"
    • Inside diameter: 0.379"
    • Outside diameter: 0.437"
    • Material: Brass
    • Weight: 0.01 Lb

    Robotics

    Subcategories