Shopping cart

Filters

Personal menu

Preferences

Servo Arm Extended

The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Length: 56mm
Width: 14mm
Height: 7.8mm
Material: 6061-T6 Aluminum
Step File

MFR Part #: 76150

$8.32

In stock

Qty:

Specifications
Reviews

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Also Purchased

Servo Hub Pro

#76152

$7.63

(In stock)

The Studica Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Height: 9mm
OD: 30mm
Material: 6061-T6 Aluminum
Step File

6mm D-Shaft Collar Clamp 2 Piece

#76293

$5.54

( 868 In stock)

PRE-ORDER Only shipping January 2023

Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6

The Studica Fast Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Fast Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.

Step File

Servo Arm

#76151

$7.63

(In stock)

The Studica Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Length: 33mm
Width: 14mm
Height: 7.8mm
Material: 6061-T6 Aluminum
Step File

Clamping 6mm D-Shaft Hub

#76281

$2.99 $11.10

( 1499 In stock)

Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels

Specifcation:

Material: 6061-T6 Aluminum
6mm ID
Hole pattern for connecting to structure
Step File

Servo Extension Cable

#70188

$6.93

( 2236 In stock)

· 450mm Length

· 3 position

· TJC8 MH-FC on one end

· TJC8 FH-MC on the other end

· Twisted cable

· Colors: White, Red, Black (red in middle)

· 24AWG Guage

Enhanced Wheel D-Shaft Hub Kit

#76291

$9.95 $20.82

( 970 In stock)

Used with Studica Omni and Mecanum wheels for a strong axel hold.

Specifications:

Material: 6061-T6 Aluminum
Color: Blue
Step File

TETRIX MAX TorqueNADO Motor Gearbox 20:1

#45424

$17.25

( 35 In stock)

These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

TETRIX MAX TorqueNADO Motor Gearbox 40:1

#45423

$22.23

( 37 In stock)

The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

6mm D-Shaft Low Profile Clamping Hub

#76292

$8.32

( 1118 In stock)

Φ29.0mm*16.0mm thick
6*M3 thread tapping through
(including 2*M3 thread for M3 SHCS)
Φ6.0mm D hole
AL6061-T6

Customers who bought this item also bought

Servo Hub Pro

#76152

$7.63

(In stock)

The Studica Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Height: 9mm
OD: 30mm
Material: 6061-T6 Aluminum
Step File

6mm D-Shaft Collar Clamp 2 Piece

#76293

$5.54

( 868 In stock)

PRE-ORDER Only shipping January 2023

Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6

Fast Multi-Mode Smart Servo

#75007

$34.50

( 690 In stock)

Step File

Servo Arm

#76151

$7.63

(In stock)

The Studica Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Length: 33mm
Width: 14mm
Height: 7.8mm
Material: 6061-T6 Aluminum
Step File

Clamping 6mm D-Shaft Hub

#76281

$2.99 $11.10

( 1499 In stock)

Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels

Specifcation:

Material: 6061-T6 Aluminum
6mm ID
Hole pattern for connecting to structure
Step File

Servo Extension Cable

#70188

$6.93

( 2236 In stock)

· 450mm Length

· 3 position

· TJC8 MH-FC on one end

· TJC8 FH-MC on the other end

· Twisted cable

· Colors: White, Red, Black (red in middle)

· 24AWG Guage

Enhanced Wheel D-Shaft Hub Kit

#76291

$9.95 $20.82

( 970 In stock)

Used with Studica Omni and Mecanum wheels for a strong axel hold.

Specifications:

Material: 6061-T6 Aluminum
Color: Blue
Step File

TETRIX MAX TorqueNADO Motor Gearbox 20:1

#45424

$17.25

( 35 In stock)

These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.