Close
Menu
Main Categories
    (0) Quote
    You have no items in your shopping cart.
    (0) Items
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    PrevRobot Base Plate
    NextServo Mount Offset Plate

    Servo Mount Flat Plate

    Be the first to review this product

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    MFR Part #: 76145
    $9.02
    Availability: 3030 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Also Purchased

    Picture of 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6.93
    (1238 In stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    Picture of 30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $31.99
    (622 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2085 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1741 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of M3 x 20mm Socket Head Cap Screw (50 pack)

    M3 x 20mm Socket Head Cap Screw (50 pack)

    #76209-50
    $11.10
    (1886 In stock)

    M3 x 20mm Socket Head Cap Screw (pack of 50), Zinc Plated.

    Picture of Servo Mount Offset Plate

    Servo Mount Offset Plate

    #76146
    $9.71
    (1125 In stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of NeveRest Motor REV Expansion Hub Encoder Cable

    NeveRest Motor REV Expansion Hub Encoder Cable

    #am-3926a
    $5.25

    This is the cable designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.

     

    2019 Update:

    The 'a' version of this cable as the encoder channels swapped so that the encoder counts in the same direction as the output shaft spins. This simplifies the usage of the encoder with the various programming languages for FTC!

    Specifications

    • Length: 20 in.
    Picture of Servo Horn 25T

    Servo Horn 25T

    #76148
    $5.54
    (876 In stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

     

     

     

    Customers who bought this item also bought
    Picture of 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6.93
    (1238 In stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    Picture of 30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $31.99
    (622 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2085 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1741 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Related products
    Picture of WorldSkills Mobile Robotics Collection Shanghai 2022

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3888.04
    (In stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    Picture of Servo Pack

    Servo Pack

    #70254
    $470.90
    (0 In stock)

    Includes,

    • 8 - Multi-Mode Smart Servo  75002
    • 1 - Smart Robot Servo Programmer  75003
    • 1 - 6V DC AA Battery Holder w/TJC8 Female, 22 AWG  75004
    • 1 - Servo Power Block  75006
    • 4 - Servo Standard Front Mount  76144
    • 4 - Servo Mount Flat Plate  76145
    • 4 - Servo Mount Offset Plate  76146
    • 8 - Servo Horn 25T  76148
    • 8 - 6mm D-Shaft Servo Hub 25T  76149
    WorldSkills Mobile Robotics Junior Collection 2021

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3262.95
    (0 In stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2085 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Picture of Smart Robot Servo Programmer

    Smart Robot Servo Programmer

    #75003
    $18.04
    (2057 In stock)

    The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.  

    Specifications:

    • Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
    • Programming setting modes
      • Standard
      • Continuous
      • Angular
    Picture of 6V DC Battery Holder, for Smart Robotics Servo Programmer

    6V DC Battery Holder, for Smart Robotics Servo Programmer

    #75004
    $6.93
    (3801 In stock)

    Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

    Specifications:

    • 6V Output
    • On/Off Power switch
    • TJC8 connector
    • Uses 4 x 1.5V AA Batteries (not included)
    Picture of Servo Power Block

    Servo Power Block

    #75006
    $51.38
    (1529 In stock)

    The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels.  The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables. 

    Features,

    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection

    Specifications,

    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File

     

    Picture of Servo Standard Front

    Servo Standard Front

    #76144
    $6.24
    (1218 In stock)

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of Servo Mount Offset Plate

    Servo Mount Offset Plate

    #76146
    $9.71
    (1125 In stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of Servo Horn 25T

    Servo Horn 25T

    #76148
    $5.54
    (876 In stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

     

     

     

    Picture of 6mm Servo Hub 25T

    6mm Servo Hub 25T

    #76149
    $8.32
    (572 In stock)

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

     

    Information
    Customer service
    My account
    Contact Info
    Copyright © 2024 Studica Limited. All rights reserved.