Close
Menu
Main Categories
    (0) Quote
    You have no items in your shopping cart.
    (0) Items
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    PrevServo Power Block
    NextSmart Robot Servo Programme...

    Servo Standard Front

    Be the first to review this product

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    MFR Part #: 76144
    $6.24
    Availability: 1215 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Also Purchased

    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1606 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of Servo Arm Extended

    Servo Arm Extended

    #76150
    $8.32
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File
    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1737 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of XT30 (MH-FC) to Tamiya (MH-FC) Cable

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $5.54
    Picture of 30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $31.99
    (620 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    Picture of #25 Connecting Link for Roller Chain

    #25 Connecting Link for Roller Chain

    #am-0371
    $1.54
    (In stock)

    #25 Connecting Link (Master Link) 

    Specifications:

    • Material: Steel
    • Style: Roller Chain - Spring Clip
    • Type: Connecting Link
    • Size: #25
    • Pitch: 0.250 inch
    • Weight: 0.01 lbs
    Picture of #25 Half Link for Roller Chain

    #25 Half Link for Roller Chain

    #am-0682
    $3.08
    (In stock)

    #25 Half Link. Also known as #25 Offset Link. 

    Specifications:

    • Material: Steel
    • Style: Roller Chain with interted pin
    • Type: Half Link
    • Size: #25
    • Pitch: 0.25 inch
    • Weight: 0.01 lbs
    Picture of 288mm Flat Beam (2 pack)

    288mm Flat Beam (2 pack)

    #76043-2
    $8.32
    (971 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 288mm
    • Step File

     

    .

    Customers who bought this item also bought
    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1606 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of Servo Arm Extended

    Servo Arm Extended

    #76150
    $8.32
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File
    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1737 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of XT30 (MH-FC) to Tamiya (MH-FC) Cable

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $5.54
    Related products
    Picture of WorldSkills Mobile Robotics Collection Shanghai 2022

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3888.04
    (In stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    Picture of Servo Pack

    Servo Pack

    #70254
    $470.90
    (0 In stock)

    Includes,

    • 8 - Multi-Mode Smart Servo  75002
    • 1 - Smart Robot Servo Programmer  75003
    • 1 - 6V DC AA Battery Holder w/TJC8 Female, 22 AWG  75004
    • 1 - Servo Power Block  75006
    • 4 - Servo Standard Front Mount  76144
    • 4 - Servo Mount Flat Plate  76145
    • 4 - Servo Mount Offset Plate  76146
    • 8 - Servo Horn 25T  76148
    • 8 - 6mm D-Shaft Servo Hub 25T  76149
    WorldSkills Mobile Robotics Junior Collection 2021

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3262.95
    (0 In stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Picture of Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2082 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Picture of Smart Robot Servo Programmer

    Smart Robot Servo Programmer

    #75003
    $18.04
    (2056 In stock)

    The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.  

    Specifications:

    • Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
    • Programming setting modes
      • Standard
      • Continuous
      • Angular
    Picture of 6V DC Battery Holder, for Smart Robotics Servo Programmer

    6V DC Battery Holder, for Smart Robotics Servo Programmer

    #75004
    $6.93
    (3800 In stock)

    Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

    Specifications:

    • 6V Output
    • On/Off Power switch
    • TJC8 connector
    • Uses 4 x 1.5V AA Batteries (not included)
    Picture of Servo Power Block

    Servo Power Block

    #75006
    $51.38
    (1528 In stock)

    The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels.  The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables. 

    Features,

    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection

    Specifications,

    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File

     

    Picture of Servo Mount Flat Plate

    Servo Mount Flat Plate

    #76145
    $9.02
    (3027 In stock)

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of Servo Mount Offset Plate

    Servo Mount Offset Plate

    #76146
    $9.71
    (1122 In stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of Servo Horn 25T

    Servo Horn 25T

    #76148
    $5.54
    (874 In stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

     

     

     

    Picture of 6mm Servo Hub 25T

    6mm Servo Hub 25T

    #76149
    $8.32
    (570 In stock)

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

     

    Information
    Customer service
    My account
    Contact Info
    Copyright © 2024 Studica Limited. All rights reserved.