Shafts, Adapters & Collars
This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.
This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment.
Specifications:
This is an adapter to convert the female spline output of the Bosch Seat Motor (am-3493) to a 2 inch long 0.5 inch hex shaft. The square end interfaces with the female spline of the motor and is retained by an included 6-32 screw and washer. Our testing shows that in a back-drive situation the worm gear in the gearbox will fail before the motor spline or this adapter.
Specifications:
Included Hardware:
Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!
Shaft Compatability
This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.
This lightweight aluminum adapter allows conversion of 0.375 inch hex shafts into 0.500 inch hex shafts or 0.500 inch hex holes into 0.375 inch hex holes. This component is not recommended for extremely high torque applications.
Specifications:
This is a 1/2 inch steel shaft with a 1/8 inch keyway machined on the entire length.
Specifications:
This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.
This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.
This is a 3/8 inch steel shaft with a 3/32 inch keyway machined on the entire length.
Specifications:
Our 6mm D Shafts are the choice of top FIRST Tech Challenge teams and hobbyists looking for a strong, compact drive axle! These shafts work great with our line of Nubs, which offer a precise D-bore that transmits torque along the flat portion of the shaft instead of relying on finicky set screws like inferior hub options. This kit includes several of our most popular lengths, so you can tinker and experiment without cutting or being surprised by a too-short shaft.
Included Items:
This 6mm shaft is the same as the shaft found in the popular NeveRest series gearboxes. This high strength shaft is great for FTC teams looking for more options in design and contstruction.
Specifications:
This 6mm shaft is the same as the shaft found in the popular NeveRest series gearboxes. This high strength shaft is great for FTC teams looking for more options in design and contstruction.
Specifications:
This 6mm shaft is the same as the shaft found in the popular NeveRest series gearboxes. This high strength shaft is great for FTC teams looking for more options in design and contstruction.
Specifications:
This 6mm shaft is the same as the shaft found in the popular NeveRest series gearboxes. This high strength shaft is great for FTC teams looking for more options in design and contstruction.
Specifications:
0.500 inch shaft with 1/8 inch keyway and 0.313 (8mm), 2mm keyed bore The bore of this adapter fits onto the 2.5" CIM Motor
WARNING: There is only a 0.016 inch thick wall of steel between the bottom of the 1/8" keyway and the 0.313" bore.
Specifications:
Do you have a hard time finding some strong hex stock aluminum? We have it! This is 7075 series aluminum, which is great for use in transmission shafts.
Specifications: