3D Depth Camera

Aluminum Clamp On Shaft Collar, 3/8" Hex Bore 

This is a wide, heavy duty, collar clamp. 

Specifications:

• Material: Aluminum
• Diameter: 0.875 - 1"
• Thickness: 0.3 - 0.34"
• Weight: 0.02 Lbs

This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

Everyone's favorite motor for indexing, and small jobs in tight spaces, is back with everyone's favorite shaft, 1/2 in. hex!

This motor and gearbox combo originally came from a snowblower assembly, but now has a custom shaft just for FRC. Use our half inch hex hub or a 1/2 in. hex bore wheel to transfer power directly, or sprocket and chain to drive the mechanism of your dreams! The shaft also now has a #10-32 hole in the end for easy hub/sprocket retention.

This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable of delivering even more immense power in the same small lightweight package over the previous version. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor can be effective in FRC drive applications as well.

This variation of the RedLine comes with a 12 tooth, 32 DP pinion already pressed on allowing this motor to be installed into EVO Slim 4 RedLine, EVO Shifter 4 RedLine and DeCIMate gearboxes. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC, and bringing these as spares to your competition won't count against your weight allowance for 2019. 

Product Usage:
Motors need air flow to keep cool. A hot motor won't last nearly as long, or deliver the power it once did new. To keep a RedLine cool and in great shape, use a 775 Vent Plate Spacer, am-3650 when mounting to a custom gearbox. All of our gearboxes that use this motor have vent plate spacers included with your purchase or include sufficient venting machined in.

Useful Additional Parts:

• RedLine Encoder Kit, am-3773
• 12 Tooth 32 DP Pinion, am-3657
• M4 x 0.7 10 mm Mounting Screw, am-1264
• Vent Plate for keeping this motor cool and functional - 775 Vent Plate Spacer, am-3650
• Fantastic Gearbox Pairing Options:
  • 57 Sport Gearboxes
  • DeCIMate Gearbox
  • EVO Slim for RedLine
  • EVO Shifter for RedLine

Motor has the following information laser etched on the flux ring:
Manufacturer Part number: DF-30F-2003 
Logo: AndyMark Logo
AndyMark Part Number: am-3775a
Voltage: 12VDC
Date Code: YYWWD

Specifications

• Bolt Pattern: 2 M4x0.7 Holes on a 29 mm diameter bolt circle
• Diameter: 1.744 in.
• Diametral Pitch: 32
• Face Width: 0.625 in.
• Free Speed: 21020 RPM
• Gear Length: 0.755 in.
• Gear Material: 1117 Steel
• Gear Weight: 0.014 lbs
• Length: 3.826 in.
• Maximum Power: 380 Watts (+/- 10%)
• No Load Current: 3.8 AMPs
• No Load Free Speed : 21020 RPM (+/- 10%)
• No Load RPM: 21020 RPM (+/- 10%)
• Output Shaft Diameter: 5 mm
• Output Shaft Length: 0.346 in.
• Pitch Diameter: 0.375 in.
• Pressure Angle: 20 Degrees
• Stall Current: 130 AMPs
• Stall Torque: 0.7 N-m (6.2 in-lbs) (+/- 10%)
• Teeth: 12
• Voltage: 12 Volts DC
• Weight: 0.819 lbs

Documents

CAD File(s)

am-3775a_12T 775 RedLine with 12T Pinion.STEP

Layout Print(s)

am-3775a_12T 775a RedLine with 12T Pinion.PDF

This motor is often used in power seats for raising the seat up and down. It is perfect for precise positioning and not back driving when power is cut. This motor features an integrated hall sensor to enable accurate positioning feedback. The wire harness can be purchased individually as am-3548 and the motor can be purchased individually as am-3493.

Usage:
WPI has some great documentation on how to interface and mount this motor. http://wpilib.screenstepslive.com/s/4485/m/63630/l/679357-bosch-seat-motor

Specifications:

• Manufacturer: Bosch LLC
• Manufacturer part number: 6004RA3194 (motor only)
• No Load Speed: 24 RPM
• No Load Current: <3A
• Stall Torque: 22Nm 16.2 ft-Lbs
• Max Stall Current: 12A
• Motor Gear Ratio: 174.9:1
• Weight: 0.87 Lbs

1/2 in. hex shaft is the life of many competitive robot components. This 1018 steel shaft is available in four lengths. The five inch shaft was used in various Modulox gearboxes and may come with a 1/4 in. hole drilled in one end. The other sizes can be used as shaft stock, ready to be cut to length as needed. The stock lengths ship un-plated ready for your choice of finish. 

This linear servos operates as a direct replacement for standard analog rotary servos. They use the same standard 3 wire connector, ground power and control. Regardless of how you drive your servos, be it with an RC receiver or an Arduino board, the L16-R servo will function in place of a regular servo, but with the added benefit of providing linear motion. These hobby grade units are constructed using an anodized aluminum shaft, metal gearbox, steel screw and steel ball bearings.

Specifications: 

• Stroke: 50mm
• Peak Power Point: 175N @ 4mm/s
• Peak Efficiency Point: 75N @ 7mm/s
• Max Speed, No Load: 8mm/s
• Max Force, Lifted: 200N
• Back Drive Force: 102N
• Max Side Load, Extended: 40N
• Closed Length (hole to hole): 118mm
• Maximum Static Force: 250N
• Feedback Potentiometer: 6k?±50%
• Weight: 0.2 Lbs

Loose Hardware Included with Actuator:

• 4 - 10-32 Screws
• 4 - 10-32 Nylock Nuts
• 2 - PWM Header
• 2 - Mounting Brackets
• 2 - Rod End Brackets

This gearbox comes with two AndyMark RedLine Motors (am-3775) to give you a total package of about the same output speed, size and weight of one CIM motor, but with almost 700 watts of power! Use this anywhere you would use a CIM with its identical output shaft and mounting geometry. Please note, this gearbox is louder than most due to the open case and and extremely fast spinning gears. 

Possess your own 775 motors and want to save money? Only want to use one motor? This gearbox is available in a motor-less, unassembled version by the part number am-3745g.

Product Usage:
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our Red Tacky Grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. For this gearbox some tape over the front vent holes of the motors during the run-in is recommended to prevent metal dust from getting inside the motor. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation. 

Specifications:

• Weight: 2.1 Pounds
• Overall Dimensions:
  • Length of Gearbox: 2.7 in.
  • Length with Motors Installed: 5.665 in.
  • Maximum Diameter: 3.531 in.
• Output Geometry:
  • Shaft Length: 1.40 in.
  • Shaft Diameter: 8mm with 2mm Keyway
• Mounting Features:
  • 4x 10-32 threaded holes on a 2 in. bolt circle
• Gear Specs:
  • Overall Gear Ratio: 3.75:1
  • Pitch: 32DP
  • Material: Steel
• Theoretical Output Speed: 5239 RPM*
• Theoretical Stall Torque: 4.7 N-m*

*Specifications are theoretical with two AndyMark RedLine Motors installed.

Pixy2 is smaller, faster and more capable than the original Pixy. Like its predecessor, Pixy2 can learn to detect objects that you teach it, just by pressing a button. Pixy2 has new algorithms that detect and track lines for use with line-following robots. The new algorithms can detect intersections and “road signs” as well. The road signs can tell your robot what to do, such as turn left, turn right, slow down, etc. And Pixy2 does all of this at 60 frames-per-second, so your robot can be fast, too.

040.5-R Bimba Cylinder