Tetrix Max Tank Tread Sprockets pkg of 2

The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

• Diameter: 110mm
• Width: 45mm
• Inner diameter of wheel frame: 75mm
• Hexagon connector: 12mm
• Unit weight: 128g
• 6mm axle adapter

TETRIX MAX Bevel Gear & Acetal Bearings includes two heavy-duty aluminum gears along with two acetal bearings that allow for the transfer of the direction of motion at 90 degrees.

• Quantity: pkg of 2 gears and 2 bearings
• Number of Teeth: 30
• Diameter: Bevel Gear diameter 59.87 mm
• Thickness: 10.85 mm
• Material: 7005 Aluminum gears, Acetal bearings

This motor controller connects to the PRIZM expansion port, enabling users to control up to two additional 12-volt DC motors. Up to four motor controllers can be connected to the PRIZM expansion port. There are two H-bridge outputs to control the speed and direction of two DC motors and two quadrature encoder input ports. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO EV3 Brick. Software blocks can be downloaded from the Resources tab below.

Add form and function to your TETRIX MAX robot with theTetrix Max; Gripper Kit. The integrated MAX hole pattern allows for a variety of mounting options, and the wide range will serve you well for picking up large items. The curved jaws and flat surfaces provide a more versatile gripping surface that can easily accommodate both round objects and flat objects. Removable gripper extension rails increase strength and versatility.

Controls the power from the battery pack to the PRIZM Robotics Controller with the flip of a switch.

TETRIX MAX Tank Tread Idler Wheels provide rolling support for tank treads, these idler wheels can be used with standard TETRIX parts.

• Quantity: pkg of 2
• Diameter: 62.30 mm
• Thickness: 28.35 mm
• Material: nylon

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

These wheels are designed to use four motors each controlling one wheel, so now your robot can move at any angle without turning and with smoother motion using holonomic behavior.