Close
Main Categories
    Filters
    Preferences
    Search

    Tube Plug 2 X 1 Inch (0.063 in. Wall Thickness)

    Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially convenient when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener.

     

    These tube plugs are designed to be used with different thicknesses of Box Tube Extrusion. The Tube Plugs that perfectly nestle into Box Tube with 0.063 in. thick walls are designed and manufactured by SDS.

     

    Specifications

    • Thread: #10-32

     

    AM-5456 for 2 X 1 .063 Wall Thickness Tube
    AM-4762 for 2 X 1 .125 Wall Thickness Tube
    MFR Part #: am-5456
    $12.00
    34 in stock
    Customers who bought this item also bought

    2 x 1 x 0.063 Aluminum Box Extrusion, 6ft

    #am-3214-6
    $55.00
    ( 22 In stock)

    This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 

    Specifications:

    • Length: 72" (+/- 1")
    • Wall Thickness: 0.062"
    • Exterior Corners: Sharp
    • Material: 6061-T6 Aluminum
    • Weight: 2.4 Pounds

    3-wire PWM cable, 36"

    #am-0695
    $6.00 $6.51

    This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.



    Note: Product received may vary from image shown. Some cables may ship with a separate protective housing on the male end of the cable. If this housing interferes with your application it can be removed with a small screwdriver gently inserted between the connector and the housing.

     

    Specifications

     

    • Gauge: 22 AWG
    • Length: 36 in.
    • Weight: 0.046 lbs
    • Wire Colors: white, red, black
    • Wire Jacketing: black heat shrink tubing

    Flanged 35mm x 47mm x 7mm Bearing - QTY 2

    #TTB-0065
    $21.72

    These bearing options are perfect for supporting spline shafts. The bearings slide on easily in our testing.

     

    Flanged version: 35mm ID x 47mm OD x 7mm overall width - 1.5mm thick flange - .070 lbs

     

    Radial version: 35mm ID x 47mm OD x 7mm overall width - .065 lbs

     

    Comes in both radial and flanged versions.

    Tube Plug 1 X 1 Inch (0.125 Wall Thickness)

    #am-4819
    $11.25
    ( 1 In stock)

    Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener.

    Red Tacky Grease, 14.2 gram

    #am-2768
    $1.16 $1.31
    (In stock)

    Here is a packet of red tacky grease used to lubricate gearboxes. This grease sticks well to gears and does not sling off as the gears spin. Although it looks like raspberry jam, don't put it on your churro! 

    Specifications:

    • Weight: 14.2 grams
    • Package size: 2"x 5"

    QTY 1 - 36 Inch Long 1/2" Rounded Hex Shaft - 6061 Aluminum

    #TTB-0068
    $14.95
    ( 50 In stock)

    A staple in any robotics team's shop - the 1/2" rounded hex shaft. This shaft allows you to drive hubs, pulleys and other 1/2" hex broached items while also fitting into a 13.75mm ID bearing with ease. This shaft comes in lengths of 36 inches so you can cut them down to the size you need.

     

    Available in both 7075 (anodized black) or 6061 (not anodized) variants.

     

    Includes a hole sized for #10 taps.

    QTY 1 - 36 Inch Long 1/2" Rounded Hex Shaft - 7075 Aluminum

    #TTB-0069
    $32.50
    ( 15 In stock)

    A staple in any robotics team's shop - the 1/2" rounded hex shaft. This shaft allows you to drive hubs, pulleys and other 1/2" hex broached items while also fitting into a 13.75mm ID bearing with ease. This shaft comes in lengths of 36 inches so you can cut them down to the size you need.

     

    Available in both 7075 (anodized black) or 6061 (not anodized) variants.

     

    Includes a hole sized for #10 taps.

    Box Tube Extrusion, 1 X 1 in., .063 Wall Thickness, 6 ft. Length

    #am-4203-6
    $47.00

    These aluminum box extrusions are robust and lightweight solutions for custom robot frames, superstructures and mechanism construction. Made to all of your favorite English sizes, the classic 2x1 thin wall tubing is now joined by its thicker-walled counterpart. We have also introduced two thicknesses of 1x1 sizes that teams know and love to build their medium-sized mechanisms. 



    For smaller mechanisms, we recommend using our 5/8 square box tube that is also compatible with our S3 line of brackets and gussets.



    Available Sizes:

    • 2 x 1 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • 2 x 1 x 1/8 in. (0.125 in.) 6061-T6 alloy
    • 1 x 1 x 1/16 in. (0.063 in.)6061-T6 alloy
    • 1 x 1 x 1/8 in. (0.125 in.)6061-T6 alloy
    • 5/8 x 5/8 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • All lengths are (+/- 1in)

     

    Be sure to all check out our Gussets as they work wonderfully with all of these wonderful extrusions.

     

    Specifications

    • Material: Aluminum

     

    Documents

    Layout Print(s)

    am-3214 2x1x0625 6061-T6 wall tubing.PDF

    am-4203 1x1x063 wall tubing.PDF

    am-4204 1x1x0.125 wall tubing.PDF

    am-4205 2x1x0.125 wall tubing.PDF

    CAD File(s)

    am-3214 2x1x0625 wall tubing.STEP

    am-4203 1x1x0625 wall tubing.STEP

    am-4204 1x1x0.125 wall tubing.STEP

    am-4205 2x1x0.125 wall tubing.STEP