Shopping cart

Filters

Personal menu

Preferences

PrevSDS MK4c Swerve Modules, As...

NextCRESCENDO Note

Vivid-Hosting VH-109 FRC Radio

Setup directions for this radio can be found here, https://frc-radio.vivid-hosting.net/

The VH-109 radio was designed for use in the FIRST robotics competition.

Unfiltered power input capable
Ruggedized for demanding FIRST FRC robots
Configurable Passive Power over Ethernet outputs (Selectable Output via DIP switches, disabled by default) for powering downstream devices
Based on Wi-Fi 2.4G 802.11b/g/n, Wi-Fi 6E 802.11ax for a modern, superior wireless experience

It can either be used as a wireless bridge, placed on your robot, connected to the robot controller, or as an indoor wireless access point connected to your robot driver station. By configuring one VH-109 as a wireless bridge, and a second VH-109 as a wireless access point, you will be able to connect the VH-109 on your robot to a VH-109 on your driver station and wirelessly controll your robot via Wi-Fi 6E.

MFR Part #: am-5583

Request a Quote

Out of stock

Qty:

Specifications

Specifications

AC-DC Power Supply: ADS-12FG-12N 12012EPCU, 100-240V AC 50/60Hz, 12.0V @ 1.0A Output
Channel Width: 802.11b/g/n (20Mhz)/n (40 MHz), 802.11ax 20, 40, 80, 160 MHz
Current: 0.5A @ 12V
Frequency (FCC regulated operating areas): Wi-Fi 2.4G: 2412-2462 MHz, Wi-Fi 6E: 5945-7125 MHz
Frequency (IC/CE regulated operating areas): Wi-Fi 2.4G: 2412-2472 MHz, Wi-Fi 6E: 5945-6425 MHz
Nominal Voltage: 12V
Output Power (AP Mode): LPI Mode (EIRP 30 dBm or 5 dBm/MHz PSD)
Voltage Input Range: 4.5V-19V
WiFi Technology: Wi-Fi 2.4G, Wi-Fi 6E

Also Purchased

10 Amp Snap Action Breaker

#am-2097

$9.00 $10.42

(In stock)

Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.

Specifications

Manufacturer: Snap Action
Style: MINI, Auto-resetting
Voltage: Up to 50V DC

5 Amp Snap Action Breaker

#am-2096

$9.00 $10.42

(In stock)

Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.

Specifications

Manufacturer: Snap Action
Style: MINI, Auto-resetting
Voltage: Up to 50V DC

roboRIO 2.0

#am-3000a

$725.00

( 0 In stock)

NOTE: This product is not included in any Sales or Discounts.

The NI roboRIO 2.0 is new for the 2022 FIRST Robotics Competition. The most up to date information, and technical specifics, will be published by NI when they become available. For more roboRIO support for FIRST Robotics Competition teams, visit ni.com/frc

This device is designed specifically with FIRST in mind. The announcement of the roboRIO 2.0 on the FIRST Robotics Competition Blog, discusses all the new features to expect.

Voltage Regulator Module

#am-2857

$90.00

( 5 In stock)

NOTE: This product is not included in any Sales or Discounts.

The Voltage Regulator Module (VRM) is a DC to DC convertor that is capable of both boost and buck voltage regulation. The device features two independent SEPIC (Single Ended Primary-inductor Converter) regulators allowing the input voltage to be above or below the desired output voltage. There are two regulators (one 5V and one 12V) each with two current limiting PTC’s (500mA and 2A). Reverse polarity protection is included.

The VRM has been used in the 2015-2021 FIRST Robotics Competition Kit of Parts. As of Sept 10, 2020 according to FIRST blog these will continue to remain competition legal in future years.

See the overview of the 2021 Controls system

Please contact support at [email protected] for warranty issues or Return Merchandise Authorization (RMA) for this product.

VRM User Guide

Documents

Layout Print(s)

am-2857 VRM.PDF

Pigeon 2.0

#am-3556a

$355.00

( 9 In stock)

Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. The gyro has built-in temperature compensation. Pigeon provides a heading by sensor fusing all 9 measurements. It can be connected to the Talon SRX for power and communication via UART, or it can be wired to the CAN bus while powered from a separate 12V source. Pigeon has built-in compass compensation for hard-iron, soft-iron, and physical tilt. The Pigeon 2.0 eliminates the need for on-boot calibration and temperature calibration and does not require stillness upon boot-up.

Specifications

AC-DC Power Supply: ADS-12FG-12N 12012EPCU, 100-240V AC 50/60Hz, 12.0V @ 1.0A Output
Channel Width: 802.11b/g/n (20Mhz)/n (40 MHz), 802.11ax 20, 40, 80, 160 MHz
Current: 0.5A @ 12V
Frequency (FCC regulated operating areas): Wi-Fi 2.4G: 2412-2462 MHz, Wi-Fi 6E: 5945-7125 MHz
Frequency (IC/CE regulated operating areas): Wi-Fi 2.4G: 2412-2472 MHz, Wi-Fi 6E: 5945-6425 MHz
Nominal Voltage: 12V
Output Power (AP Mode): LPI Mode (EIRP 30 dBm or 5 dBm/MHz PSD)
Voltage Input Range: 4.5V-19V
WiFi Technology: Wi-Fi 2.4G, Wi-Fi 6E

Customers who bought this item also bought

10 Amp Snap Action Breaker

#am-2097

$9.00 $10.42

(In stock)

Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.

Specifications

Manufacturer: Snap Action
Style: MINI, Auto-resetting
Voltage: Up to 50V DC

5 Amp Snap Action Breaker

#am-2096

$9.00 $10.42

(In stock)

Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.