Close
Main Categories
    Filters
    Preferences
    Search

    Wheels, Tires, & Rims

    Wheels, Tires, & Rims
    View as Grid List
    Sort by
    Display per page

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $14.50
    (43 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 1/2" Hex Bore, 40A Durometer, Orange

    #am-3480_orange
    $14.50
    (17 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 1/2" Hex Bore, 50A Durometer, Blue

    #am-3480_blue
    $14.50
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 1/2" Hex Bore, 60A Durometer, Black

    #am-3480_black
    $14.50
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 3/8" Hex Bore, 35A Durometer, Green

    #am-3562_green
    $12.75

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 3/8" Hex Bore, 50A Durometer, Blue

    #am-3562_blue
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, 3/8" Hex Bore, 60A Durometer, Black

    #am-3562_black
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, Nub Bore, 35A Durometer, Green

    #am-3563_green
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, Nub Bore, 50A Durometer, Blue

    #am-3563_blue
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" Compliant Wheel, Nub Bore, 60A Durometer, Black

    #am-3563_black
    $12.75
    (In stock)
    • Material Durometer: 60A
    • Diameter: 4"
    • Width: 1"
    • Bore: 0.314" (8mm)
    • Maximum RPM: 9000 RPM
    • Weight: 0.268 Lbs

    4" Compliant Wheels 3/8" Hex Bore 40A Durometer, Orange

    #am-3562_orange
    $12.75
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    4" DuraOmni Roller, Set of 8

    #am-3048
    $24.60
    (In stock)

    These rollers are used in the 4" DuraOmni Wheel. Eight of these roller are used to allow the wheel to roll smoothly and omni-directionally.

    Eight replacement rollers are included in this set. No other hardware is included.

    Specifications:

    • Number of Rollers: 8
    • Roller Material, Outside: Gray TPU rubber
    • Roller Durometer: 80A
    • Roller Material, Inside: white nylon
    • Roller Bearing Material: nylon spinning on steel (dowel axle not included)
    • Roller Length: 1.62 inches
    • Roller Diameter: 0.9 inch
    • Roller Weight: 0.032 pounds each.

    4" DuraOmni Wheel

    #am-3047
    $36.90
    (In stock)

    This heavy duty omni wheel is a vast improvement over our older 4" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well.

    The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured 1/8" x 1.875" dowel pin.

    This image shows how to attach the DuraOmni to the AM14U2

    Specifications: 

    • Diameter: 4"
    • Width Across Middle: 2.0 inches
    • Bore: 1.125 inch diameter x 0.36" deep with a 0.96" diameter thru hole
    • Bolt Pattern: 6 holes (0.157 in.) on a 1.875 inch bolt circle
    • Body Material: Black polycarbonate
    • Load Capacity: 120 pounds (rollers don't spin past this point)
    • Weight: 0.59 pounds
    • Number of Rollers: 8
    • Roller Material, Outside: Gray TPU rubber
    • Roller Durometer: 77A
    • Roller Material, Inside: white nylon
    • Roller Bearing Material: nylon spinning on steel
    • Roller Axle: 1/8" diameter steel dowel pin
    • Roller Length: 1.62 inches
    • Roller Diameter: 0.9 inch
    • Assembled and Repairable by installing or removing 10-24 screws

    Included Hardware:

    • One - Interior polycarbonate body piece
    • Two - Outer polycarbonate body pieces
    • Eight - Gray Rollers
    • Eight - 1.875x1/8 Steel Dowel Pins
    • Eight - #10-24 x 0.50" Hex Head Screws, thread-forming

    Usage: 
    With Axle and Hub:

    • To drive this wheel with an axle and hub, pick any of the AndyMark hubs to this wheel. Hubs are NOT included in the price of the wheel. No bearings are needed when driving with an axle.

    With Sprocket:

    • To drive this wheel with a sprocket, the sprocket needs to be attached to the side of the wheel with screws, and two ball bearings are to be pressed into the wheel, one on each side.

    With Bearings, as a Caster:

    • Bearings can be pressed in to the 1-1/8" diameter pockets on each side of the wheel. This setup creates a nice caster.

    4" DuraOmni Wheel w/ 1/2" Bearings

    #am-3081
    $44.59
    (In stock)

    4" DuraOmni Wheel with 1/2" id bearings. This new heavy duty omni wheel is a vast improvement over our older 4" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well. 

    The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured 1/8" x 1.875" dowel pin. 

    Specifications: 

    • Diameter: 4 inches
    • Width Across Middle: 2.0 inches
    • Bore: 0.500 inch
    • Bolt Pattern: 6 holes (0.157 in.) on a 1.875 inch bolt circle
    • Body Material: Black polycarbonate
    • Load Capacity: 120 pounds (rollers don't spin past this point)
    • Weight: 0.72 pounds
    • Number of Rollers: 8
    • Roller Material, Outside: Gray TPU rubber
    • Roller Durometer: 77A
    • Roller Material, Inside: white nylon
    • Roller Bearing Material: nylon spinning on steel
    • Roller Axle: 1/8" diameter steel dowel pin
    • Roller Length: 1.62 inches
    • Roller Diameter: 0.9 inch
    • Assembled and Repairable by installing or removing 10-24 screws
    • Half inch id bearings pre-pressed into hub

    Individual Components within this Part:

    • One - Interior polycarbonate body piece
    • Two - Outer polycarbonate body pieces
    • Eight - Gray Rollers
    • Eight - 1.875x1/8 Steel Dowel Pins
    • Eight - #10-24 x 0.50" Hex Head Screws, thread-forming
    • Two - 1/2" id Bearing, Shielded (R8ZZ) (am-0181)

    Usage:
    With Axle and Hub:

    • If you wish to drive one of these wheels with an axle and hub, then no bearings are needed. Use am-3047 instead.

    With Sprocket:

    • To drive this wheel with a sprocket, the sprocket needs to be attached to the side of the wheel with screws. This setup will work nicely spinning over a 1/2" diameter axle.

    4" FTC Aluminum Omni Wheel With 8mm Bore

    #am-2948
    $47.66
    (In stock)

    This is our 4" aluminum omni wheel. This wheel features the 8mm center bore with 4-hole pattern used in multiple building systems used in FIRST Tech Challenge.

    Specifications: 

    • Diameter: 3.96 inches
    • Width Across Middle: 0.375 inches
    • Bore: 0.315"
    • Bolt Pattern: Four 0.157" holes on a 0.630" circle.
    • Body Material: Aluminum
    • Load Capacity: 50 pounds (rollers do not spin past this weight)
    • Weight: 0.412 pounds
    • Number of Rollers: 9
    • Roller Material: Black SBR rubber
    • Roller Bearing Material: Brass
    • Roller Axle: Steel dowel pin
    • Roller Diameter: 3/4 inch
    • Roller Durometer: 80A
    • Repairable by removing perimeter #10 screws

    Included Hardware:

    • One - 4" Aluminum Omni Inner Plates
    • Two - 4" Aluminum Omni Outer 8mm Hub Plate
    • Nine - Black SBR Rollers
    • Nine - 1x1/8 Steel Dowel Pins
    • Eighteen - Omni-roller Sleeves
    • Six - Individual #10-32 x 3/8" Button Head Phillips Screws
    • Six - #10-32 Pem Nuts
    • One - FTC Wheel Conversion Plate
    • Six - Individual #10-32 x 5/8" SHCS

    4" HD Mecanum Roller Single Axle

    #am-3027
    $4.61
    (In stock)

    This TPU roller is used in the 4" HD Mecanum Wheels. 9 rollers are used per wheel and 36 rollers are used in a wheel set.

    Specifications:

    • Roller Material: TPU
    • Roller Material: Brass