toutes catégories

    0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

    This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it. 




    • Inside Diameter: 0.192 in.
    • Length: 1 in.
    • Material: Aluminum
    • Outside Diameter: 0.375 in.
    • Wall Thickness: 0.09 in.
    # Pièce: am-3876
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    2 in. Stealth Wheel, 1/2 in. Hex Bore, 60A Durometer

    (En stock)

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.


    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.


    Layout Print(s)

    am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

    am-3156 2IN 8mm Stealth Wheel REV3.PDF

    am-3436 2in 375Hex Stealth Wheel REV3.PDF

    am-3155 2in 500Hex Stealth Wheel REV3.PDF

    am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

    am-2648 4IN 8mm Stealth Wheel REV5.PDF

    am-3435 4in 375Hex Stealth Wheel REV3.PDF

    am-2647 4in 500Hex Stealth Wheel REV3.PDF

    CAD File(s)

    am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

    am-3156 2IN 8mm Stealth Wheel.STEP

    am-3436 2IN 375Hex Stealth Wheel REV2.STEP

    am-3155 2IN 500Hex Stealth Wheel REV2.STEP

    am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

    am-2647 4inWheel 500 Hex REV2.STEP

    am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

    am-2648 4inWheel 8mm Hub REV2.STEP

    Falcon 500 Spline to 1/2 in. Hex Shaft Adapter

    (0 En stock)

    These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. This product includes the correct size washers to retain items along the hex shaft, as well as a thread-patch 8-32 screw to be used in conjunction with spacers included with the Falcon 500 motor to retain motion hardware.

    Ultra Flexible Wire -12 AWG


    These 10 and 12 gauge silicone wire are the best things to happen to robot wiring! Both gauges offer high strand count in a flexible sheathing. This wire allows for tight turns in small spaces, allowing you to achieve cleanliness unlike anything seen before. This is the wiring you need to achieve satisfyingly clean robot wiring, like what FRC Team 1538 achieves every year, but it's also perfect for wire runs that have to move with mechanisms on your robot.


    Each product on this page is a pack of 25 feet of red wire and 25 feet of black wire. Each color is separate but packaged together. This is not "zip cord" like our lower strand count wire.



    • Color: Black and Red
    • Diameter: 0.18 in., 0.22 in.
    • Gauge: 10, 12
    • Insulation: Silicone Rubber
    • Length: 25 Feet of Each Color
    • Maximum Voltage: 600V
    • Strand Count: 650+, 1000+
    • Temperature Rating: -60 to 200 Celcius

    12V Lead Acid Battery Set of 2

    (6 En stock)

    The SLA1116 is a 12 Volt, 18 amp-hour sealed lead acid battery with nut and bolt connector. The batteries will be packed within a 7"x7"x7" box (aka: interior box). A layer packing material surrounds the interior box, within a 9"x9"x9" box. The entire weight of this double box packing assembly will be approximately 29 pounds. 


    These premium batteries are AGM (absorbent glass mat) type sealed lead-acid batteries. AGM batteries use thin glass fibers interwoven into a mat. This helps to make the battery spill-proof, as the fibers containing the glass mat gradually absorbs the acid composition. As a result, AGM batteries have fewer hazardous material limitations.


    AGM’s unique composition allows the batteries to produce high currents and longer life span. The technology also minimizes internal resistance and helps the battery to survive low temperatures. Specific models of AGM product will allow users to benefit from AGM’s deep-cycling capability. It also offers a charging speed that is 5x faster than conventional flooded deep-cycle batteries.

    • Less prone to sulfation - (Topping off charges typically only required every three months).
    • High on-demand power, Low internal resistance & responsive to demand load.
    • Longer/ better cycles & efficient usage life than conventional flooded systems.
    • Up To 5X Faster charging capacity (Compared to conventional flooded battery technology).
    • Stands up well to cold temperature.
    • Vibration resistance due to sandwich construction.
    • Spill proof through acid encapsulation in matting technology.
    • Eco-friendly, has less electrolyte and lead compared to conventional flooded type batteries.

    • Higher cost than conventional batteries.
    • Must be stored in charged condition (less critical than conventional flooded batteries).
    • AGM batteries are sensitive to overcharging

    Two (2) batteries are shipped within one box for this price.




    • AMP Hours: 18
    • Life Expectancy: 100% Depth of Discharge: 200 Cycles, 80% Depth of Discharge: 225 Cycles, 50% Depth of Discharge: 500 Cycles
    • Life Span: 3-5 years in float service application, 1-2 years in competition robotics at peak performance, but longer as a practice or demo battery
    • Manufacturer: Interstate Batteries
    • Manufacturer Part #: SLA1116
    • Size: 7.1 in. long x 3.0 in. wide x 6.58 in. tall
    • Style: Sealed Lead Acid
    • Voltage: 12V DC
    • Weight: 12.5 lbs each battery



    Interstate Batteries SLA1116 User Guide.pdf

    2 x 1x 0.063 Aluminum Box Extrusion, 6ft

    (En stock)

    This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 


    • Length: 72" (+/- 1")
    • Wall Thickness: 0.062"
    • Exterior Corners: Sharp
    • Material: 6061-T6 Aluminum
    • Weight: 2.4 Pounds

    Neo 550 Brushless Motor

    (41 En stock)

    The REV NEO 550 Brushless Motor is the newest member in the NEO family of brushless motors. Its output power and small size are specifically designed to make NEO 550 the perfect motor for intakes and other non-drivetrain robot mechanisms. Mounting holes and pilot match a standard 550 series motor, making it natively mount to many existing off-the-shelf gearboxes.

    • Mounting features match 550 series DC motors
    • Out-runner construction
      • Rotor housing compatible with REV Motion Pattern - Mount metal Gears, Sprockets, and Pulleys
    • Front and rear ball bearings
    • High temperature neodymium magnets
    • High-flex silicone motor wires
    • Integrated motor sensor
      • 3-phase hall sensors
      • Motor temperature sensor