Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    1:1 LJ Bevel Box with 0.5"Hex Output Shaft and CIM Mounting

    The LJ Bevel Box is a right angle gearbox using steel bevel gears, designed to integrate with a CIM Motor (am-0255), CIM-Sim (am-0932), 57 Sport, or CIM Sport. This setup allows for the use of a gearbox or CIM motor in locations where you many not have the space available for an assembly in a straight line. We recommend using this gearbox in low torque setups. An E4T encoder can be added to the side of this gearbox, but is not included.

    # Pièce: AM-3840_CIM
    $175.28
    Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    #10-32 x 1.5" SHCS - Min 25

    #am-1014
    $0.38
    (En stock)

    Statistics:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 1-1/2 inch
    • Head: Socket Head Cap Screw

    10-32 Nylock Nut

    #am-1042
    $0.08
    (En stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (87 En stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    Split Collar Clamp 1/2 in. Hex HD

    #am-1526
    $5.50
    (186 En stock)

    This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 En stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

    #am-3876
    $2.75

    This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it. 

     

    Specifications

     

    • Inside Diameter: 0.192 in.
    • Length: 1 in.
    • Material: Aluminum
    • Outside Diameter: 0.375 in.
    • Wall Thickness: 0.09 in.