This is a pneumatic meter-out flow control valve. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
Meter-out allows for the flow to be controlled in one direction, while the opposite flow is not restricted.
This is a pneumatic push-to-connect male elbow fitting. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting. Specifications:
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 1/2" hex. The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark. Specifications:
Plastic spacers are included with this clamp, positioned between the two halves. These are to be removed before usage.
This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. Specifications:
This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!
The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.
CAD File(s)
am-3914_35 35 Chain Tensioner.STEP
Layout Print(s)
am-3914_35 #35 Chain Inline Tensioner.PDF
Tip-to-tip length is approximately 12.6 inches.
This is a hex nipple brass fitting, with one end being 1/4" NPT and the other being 1/8" NPT port. The intent of this part is to connect the air compressor (pump) to the aluminum manifold within the Pneumatics Base Kit. Specifications:
Sauro CTF020V8 connector, to be used as the power connector with the roboRIO
The easy way to change the length of your #25 chain. (Chain not included)
BRAND NEW NEXT-GENERATION SENSOR NOW AVAILABLE - leveraging new sensors and state-of-the-art algorithms to deliver a leap forward in accuracy and performance.
“Generation 2” navX2-MXP is a drop-in replacement for “Classic” navX-MXP, adding significant performance enhancements. See the Frequently Asked Questions (FAQ) for more information about navX2-MXP's new and enhanced capabilities.
navX2 MXP 4.1
Key specifications include:
Many capabilities:
What's New and Improved in navX2-MXP
More technical details are available in the navX2 MXP technical specifications and there's even more information at navX2-MXP Online.
Software Install:
WPILib Online Install Link: https://dev.studica.com/releases/2023/NavX.json
WPILib Offline Install, once downloaded, extract the contents into C:\Users\Public\wpilib\2023\ on windows or ~/wpilib/2023/ on Linux and macOS.