Aluminum Rivet, 1/8" thick, 0.275" body length, 0.375" diameter head, quantity 500 Specifications:
The SRX Mag Encoder is a rotary sensor that can be used to measure rotational position and velocity. The device senses the magnetic field of a diametrically polarized magnet to determine rotational position with 12 bit precision. The device provides both a Quadrature interface that may be used for relative position measurement and a Pulse Width Modulated output for absolute position measurement. The device connects directly to the Talon SRX data port and is directly supported in the Talon SRX firmware. Please see Magnetic Encoder user's guide for more information and kit contents. Works with this cable: Talon SRX Data Cable, 6 in (am-2617) Included Components:
This is 12 GA bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.
If you are looking for a much more flexible wire or wire that is not bonded check out our Silicone Wire.
* - This is also known as zip cord or zip wire.
This is a 25 foot section of a twisted pair of 22 AWG wire.
Everyone knows, Blue Nitrile Roughtop Tread is the best tread in the competitive robotics marketplace. This tread is the magic behind many top-performing robots. This tread is a ground-breaking 1.5 inches wide to fit wider profile wheels like our 1.5 inch wide XL Performance Wheels. Or, use this on your own custom wheels - now you don't have to custom-cut tread for your custom wheels!
This is 22 AWG (gauge) bonded wire with Black/Red and White Jacketing. It lets you create your own length PWM cable.
This is a kit of loose Anderson Power Products (APP) Powerpole (model PP45) connector hardware, aimed at providing a robot builder some tools to make dis-connectable cables and wires. This kit contains 100 Red Housings, 100 Black Housings and 200 Contacts. This kit provides the connecting hardware needed to make 100 Ground/12V pairs that are easily removable. The contacts are rated for 45 amps, and sized for 10-12 gauge wire. Use this Powerpole Crimper for good connection. Included Hardware:
This crimp tool is the ultimate Powerpole crimper. The jaws work for 15, 30, and 45 connectors. This crimp tool has a built-in positioner to hold the contacts during crimping. The ratchet mechanism assures proper crimps every time.
The 15 amp connector and be crimped with 16 28 and 20 AWG wire. The 30 amp connector can be crimped with 12 and 14 AWG wire. 45 amp connector can be crimped with 10-12 AWG wire.
This is a kit of loose components to get you from the start line to finish line on your wiring projects. Powerpole PP45 housings in white black and red at a whopping 50 count of each and 150 contacts are included in this bundle. The contacts are rated for 45 amps, and sized for 10-12 gauge wire. We recommend our crimp tool as the perfect crimp tool for making cables.