10-32 x 0.5 in. Socket Head Cap Screw

This item can only be purchased in multiples of 25

Specifications: 

• Material: Steel
• Coating: Zinc Plated
• Thread: #10-32
• Thickness: 0.249"
• Thread: Fine
• Thread Size: 32
• Type: Nylon Insert Lock Nut
• Wrench Size: 3/8"

Specifications:

• Material: Steel
• Coating: Zinc Plated
• Thread: 10-32
• Length: 3/4"
• Head: Socket Head Cap Screw

This item can only be purchased in multiples of 25

Product Overview

These blind steel rivets are a perfect, strong choice for creating frames when using our 1in. Gussets paired with up to .125" wall aluminum tubing. These steel rivets won't let you down when you need them most!

Specifications

• Diameter: 3/16 in.
• Drill Size For Hole: #11
• Finish: Zinc
• Grip Range: 0.126-0.25 in.
• Head: Buttonhead
• Hole Size: 0.192-0.196 in.
• Length: 0.45 in.
• Mandrel Material: Steel
• Material: Steel
• Rivet Style: Blind
• Weight: 0.0094

Washers are typically used distribute a fastener load over a wider area so components that are being held together are not damaged. This washer has a 0.406 inch inside diameter, 0.812 inch outside diameter, and 0.06 inch thickness.

Specifications

• Finish: Zinc
• Inside Diameter: 0.406 in.
• Material: Steel
• Outside Diameter: 0.812 in.
• Thickness: 0.062 in.

Specifications:

• Material: Steel, zinc plate
• Hex Width: 9/16 in.
• Thickness: 0.45 in.
• Weight: 0.018 pounds

Specifications:

• Material: Steel
• Coating: Zinc plated
• Thread: 10-32
• Length: 5/8 inch
• Head: Socket Head Cap Screw
• Yellow Nylon Thread Lock Patch

This Nylock jam nut can be paired with 6-32 screws to mount S3 Tubing (am-3594) to brackets within the S3 Ecosystem.

Specifications:

• Material: Steel
• Coating: Zinc plated
• Thickness: 0.140 in.
• Thread: Coarse
• Thread Size: 32
• Type: Nylon Insert Lock Nut
• Wrench Size: 5/16"

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

3/8-16 x 3.5 inch long Hex Head Bolt 

Specifications:

• Material: steel, with zinc plating
• Length: 3.5 inches under the head
• Thread: 3/8-16
• Hex width: 9/16 inch
• Weight: 0.116 pounds
• Grade 5

This 0.5 in. long 8-32 Button Head Cap Screw is used on the end of a Falcon 500 motor to retain pinions, adapters, or other spline hardware. It is included with the Falcon 500 Spline to 1/2 inch Hex Shaft Adapter.

Specifications

• Drive: 3/32 in.
• Finish: Black Oxide
• Head: Button Cap
• Length: 0.5 in.
• Material: Alloy Steel
• Thread: 8-32
• Weight: 0.006 lbs