Secure Powerpole connections with these easy to use Powerpole Clips. Don't worry about your power pole connections coming loose during those important times and when the time comes to swap components, the clip comes out easily. Works for PP15, PP30 and PP45.
This item can only be purchased in multiples of 10
This 20 Amp fuse is used in FIRST Tech Challenge batteries and the FIRST Robotics Competition Power Distribution Panel (am-2856). Specifications:
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material. Specifications:
Usage (for best application):
The MINI® Fuse is the standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high temperatures in adverse environments makes the MINI® Fuse of recommended choice for protection.
This mini fuse can be used in our Power Pole Distribution Board (am-3699), as well as a replacement in the Power Distribution Panel (am-2856)
The MK4i module inverts the motors on an MK4 module to a lower position where they are out of the way and better protected. Overall height and center of gravity are therefore lower. The MK4i module also moves the wheel further into the corner of the chassis for a wider wheelbase which results in a more stable robot. Because the wheel is moved into an area the frame would typically occupy, the MK4i includes a secondary plate to properly box in the chassis.
Clear polycarbonate perforated sheet.
Useful in many applications, with the original design intent is to act as a floor for the chassis of a robot.
Perfect for helping mount nearly anything quickly with cable ties, or use for cable management.
Holes are made to be a standard 1/2 in. apart, and this sheet can be cut down to any size needed.
Layout Print(s)
am-4262 am-14U4 Family Perforated Polycarbonate.PDF
This encoder is a magnetic rotary encoder that communicates over a robots' CAN bus. This encoder supports CAN 2.0 and provides the same position, velocity, and resolution as you would expect from the SRX Mag encoder.
For Cross The Road Electronics warranty replacements or assistance with CTRE products, please contact Cross The Road Electronics. Email: [email protected]
Don't see what you need?
See_all_our_guides,_drawings_and_CAD_files_here