20T 05" Hex Bore Miter Gear

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

This gear is the CIM gear for the Toughbox and Toughbox Mini. 

Specifications:

• Material: 4140 steel
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 14
• Pitch Diameter: 0.7 inch
• Bore: 0.314 inch (8mm) diameter, with 2mm keyway
• Thickness: 0.50 inch
• Weight: 0.05 pound

Specifications:

• Tooth Count: 25
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.25"
• Face Width: 0.5"
• Material: 4140 Steel
• Bore: 0.5" Hex

This 40 tooth bevel gear is paired with a 20 tooth bevel gear (am-2621) to make the LJ Bevel Box (am-2622)

Specifications:

• Material: 4020 Steel
• Module 1.25
• Number of teeth: 40
• Pitch diameter: 50mm
• Bore: 3/8" Hex
• Weight: 0.19 pound

Specifications:

• Tooth Count: 40
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 2.0"
• Face Width: 0.375"
• Material: 4140 Steel
• Bore: 0.5" Hex
• Weight: 0.176 Lbs

Specifications:

• Number of teeth: 56
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Pitch Diameter: 2.8"
• Face width: 0.344"
• Overall width: 0.380"
• Bore: 0.502" hex hole
• Material: 4140 steel, cold formed into gear teeth
• Weight: 0.6 lbs.

These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. This product includes the correct size washers to retain items along the hex shaft, as well as a thread-patch 8-32 screw to be used in conjunction with spacers included with the Falcon 500 motor to retain motion hardware.

Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a 8mm bore with a 2mm keyway, fitting perfectly on a CIM motor shaft. 

Specifications:

• Material: 1045 Steel
• Module: 1.25
• Tooth Count: 20
• Pressure Angle: 20
• Pitch Diameter: 0.980 in
• Mounting Distance: 0.910 in
• Hub Depth: 0.350 in
• Hub Diameter: 0.870 in
• Bore: 8 mm with 2 mm keyway
• Weight: 0.078 Pounds