Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    25 Series Bearing Bore Plate Sprockets, Number Of Teeth: 56

    8 different offerings of our 25 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!

     

    These aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #25 roller chain.  They also work with other build systems that use a 2 in. bolt circle for mounting. The larger versions also have a mounting pattern compatible with 2x1 box tube usefull for making arms.

    # Pièce: am-4785
    $23,00
    6 en stock

    Note: Despite the prints, at this time tooth alignment to holes is not controlled on these sprockets. 

    Part NumberTooth CountBorePitch Diameter (in.)Outside Diameter (in.)
    am-4781321.125 in2.5512.691
    am-4782381.125 in3.0273.169
    am-4783441.125 in3.5043.647
    am-4784501.125 in3.9814.125
    am-4785561.125 in4.4594.603
    am-4786621.125 in4.9365.081
    am-4787681.125 in5.4135.559
    am-4788741.125 in5.8916.036

     

    Specifications

    • Bolt Circle: 0.201 in. diameter on bolt circle of 1.875 in. diameter
    • Chain Series: 25
    • Inside Diameter: 1.125 in.
    • Material: 7075 Aluminum
    • Thickness: 0.118 in.

    Documents

    Layout Print(s)

    am-4781 32T 25 Chain 1125in Plate.pdf

    am-4782 38T 25 Chain 1125in Plate.pdf

    am-4783 44T 25 Chain 1125in Plate.pdf

    am-4784 50T 25 Chain 1125in Plate.pdf

    am-4785 56T 25 Chain 1125in Plate.pdf

    am-4786 62T 25 Chain 1125in Plate.pdf

    am-4787 68T 25 Chain 1125in Plate.pdf

    am-4788 74T 25 Chain 1125in Plate.pdf

    CAD File(s)

    am-4781 32T 25 Chain 1125in Plate.STEP

    am-4782 38T 25 Chain 1125in Plate.STEP

    am-4783 44T 25 Chain 1125in Plate.STEP

    am-4784 50T 25 Chain 1125in Plate.STEP

    am-4786 62T 25 Chain 1125in Plate.STEP

    am-4787 68T 25 Chain 1125in Plate.STEP

    am-4788 74 25 Chain 1125in Plate.STEP

    am-4785 56T 25 Chain 1125in Plate.STEP

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent

    Note: Despite the prints, at this time tooth alignment to holes is not controlled on these sprockets. 

    Part NumberTooth CountBorePitch Diameter (in.)Outside Diameter (in.)
    am-4781321.125 in2.5512.691
    am-4782381.125 in3.0273.169
    am-4783441.125 in3.5043.647
    am-4784501.125 in3.9814.125
    am-4785561.125 in4.4594.603
    am-4786621.125 in4.9365.081
    am-4787681.125 in5.4135.559
    am-4788741.125 in5.8916.036

     

    Specifications

    • Bolt Circle: 0.201 in. diameter on bolt circle of 1.875 in. diameter
    • Chain Series: 25
    • Inside Diameter: 1.125 in.
    • Material: 7075 Aluminum
    • Thickness: 0.118 in.

    Documents

    Layout Print(s)

    am-4781 32T 25 Chain 1125in Plate.pdf

    am-4782 38T 25 Chain 1125in Plate.pdf

    am-4783 44T 25 Chain 1125in Plate.pdf

    am-4784 50T 25 Chain 1125in Plate.pdf

    am-4785 56T 25 Chain 1125in Plate.pdf

    am-4786 62T 25 Chain 1125in Plate.pdf

    am-4787 68T 25 Chain 1125in Plate.pdf

    am-4788 74T 25 Chain 1125in Plate.pdf

    CAD File(s)

    am-4781 32T 25 Chain 1125in Plate.STEP

    am-4782 38T 25 Chain 1125in Plate.STEP

    am-4783 44T 25 Chain 1125in Plate.STEP

    am-4784 50T 25 Chain 1125in Plate.STEP

    am-4786 62T 25 Chain 1125in Plate.STEP

    am-4787 68T 25 Chain 1125in Plate.STEP

    am-4788 74 25 Chain 1125in Plate.STEP

    am-4785 56T 25 Chain 1125in Plate.STEP

    Les clients ayant acheté cet article ont également acheté

    2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

    #am-3462_green
    $8,00 $10,42
    ( 60 En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    Split Collar Clamp 1/2 in. Hex HD

    #am-1526
    $5,50
    ( 172 En stock)

    This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $9,00 $10,42
    ( 189 En stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    1/2 in. Hex Collar Clamps, Silver Thin (0.25in) - 1 part

    #am-1635
    $6,95
    ( 37 En stock)

    These custom designed collar clamps have been designed specifically with FIRST Robotics Competition teams in mind. The one-piece collar clamp is a nice fractional 1/2 in. width to make shaft stackups easy. The clamping force is provided by a 10-32 socket head screw, which is bigger than most used in the competition marketplace.  This provides a high-strength clamping solution that shouldn't strip out when you need it most. You can even replace the 10-32 screw if it becomes lost with the screws historically used in the AM14U family of chassis. These thoughtfully designed collar clamps also have small bosses on each side. This allows these collar clamps to be installed directly adjacent to an FR8ZZ Round or FR8ZZ Hex bearing without rubbing on the outer races for smooth operation.

    25 Series Bearing Bore Plate Sprockets - 74 Tooth

    #am-4788
    $24,00
    ( 4 En stock)

    8 different offerings of our 25 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!

     

    These aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #25 roller chain.  They also work with other build systems that use a 2 in. bolt circle for mounting. The larger versions also have a mounting pattern compatible with 2x1 box tube usefull for making arms.

    West Coast Drive Style Bearing Block Kit

    #am-4576
    $40,00
    ( 25 En stock)

    A West Coast style drivetrain can be finicky to create without precision machining capabilities. This Bearing Block Kit makes it much more accessible for teams to create high performance West Coast Drive style platforms with limited fabrication resources. Simply drill a clearance hole for a shaft to pass through your drive rail, pull your chain or belt tight, and clamp it down with the included hardware. Featuring machined pockets to capture 10-32 Nylock Nuts, these blocks can be used and reused without worrying about damaging threads upon installation. Because each block is the same part, you can keep the screw heads pointing to the outside of your robot for easy maintenance. 

     

    This unassembled kit ships with enough hardware to provide significant clamping pressure to help keep your powertrain components tensioned properly, and can withstand upwards of 1500lbs of force along the axis of the tube when properly installed. This means that for most FRC use cases, a team can install these without the need for tensioning devices to keep things aligned.

     

    The AndyMark West Coast Drive Bearing Block Kit is designed to be used with flanged ball bearings with a 1.125" outer race, such as our FR8ZZ-HexHD Bearing.

     

    Wheel Example

     

    The AndyMark West Coast Drive Bearing Block Kit also includes mounting geometry for components that utilize 2" and 1.875" bolt circles, such as motors, gearboxes, sprockets, hubs and gears. This makes this product great for many uses outside of your drivetrain, such as a robust interface to make a rotary arm, or an easy-to-use mounting interface for motors to power your mechanisms. The bearing plate is also 2" wide, making it perfect to keep two 20DP gears (of which the total teeth add up to 80,) meshed together.

     

    Sprocket Example Gearbox and Gears Example

    Items Included

    • 2 - WCD Bearing Block (am-4560)
    • 4 - 10-32 Nylock Nut (am-1042)
    • 4 - 10-32 x 1.5in Socket Head Cap Screw (am-1014)

    Specifications

    • Block Height: 0.45 in.
    • Block Length: 2.88 in.
    • Block Material: Aluminum
    • Block Width: 2.00 in.
    • Weight: 0.33 lbs

     

    Documents

    Layout Print(s)

    am-4576 WCD Bearing Block Kit.pdf

    am-4560 WCD 1.125 Bearing Block REV 2.pdf

    CAD File(s)

    am-4576 WCD Bearing Block Kit.STEP

    am-4560 2x1 WCD 1.125 Bearing Block REV2.STEP

    1 in. 8 mm to 1/2 in. Hex Shaft Adapter

    #am-0588_long
    $16,91
    (En stock)

    This adapter converts an 8 mm keyed shaft to 1/2 in. hex. The keyway is 2 mm wide. This allows you to adapt the output of a motor or gearbox like the CIM Motor (am-0255) to any of our hubs or wheels with a 1/2 in. hex bore. You'll need a 2 mm machine key (am-1121) to complete the assembly and transmit torque from the motor. 

     

    This adapter is no longer available in the 0.75 in. length.

     

    Specifications

    • Bore: 8 mm Round
    • Keyway Width: 2 mm
    • Length: 0.5 in., 1 in.
    • Material: Steel
    • Weight: 0.03 lbs
    • Width: 0.497 - 0.499 in.

    4" Stealth Wheel, 1/2" Hex Bore, 50A, Blue, Durometer(am-2647_Blue)

    #am-2647_Blue
    $12,00 $12,15
    ( 68 En stock)

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

    am-3156 2IN 8mm Stealth Wheel REV3.PDF

    am-3436 2in 375Hex Stealth Wheel REV3.PDF

    am-3155 2in 500Hex Stealth Wheel REV3.PDF

    am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

    am-2648 4IN 8mm Stealth Wheel REV5.PDF

    am-3435 4in 375Hex Stealth Wheel REV3.PDF

    am-2647 4in 500Hex Stealth Wheel REV3.PDF

    CAD File(s)

    am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

    am-3156 2IN 8mm Stealth Wheel.STEP

    am-3436 2IN 375Hex Stealth Wheel REV2.STEP

    am-3155 2IN 500Hex Stealth Wheel REV2.STEP

    am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

    am-2647 4inWheel 500 Hex REV2.STEP

    am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

    am-2648 4inWheel 8mm Hub REV2.STEP