Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    2" Stealth Wheel 5mm Hex, Blue, 50 Durometer (am-3664_blue)

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

    am-3156 2IN 8mm Stealth Wheel REV3.PDF

    am-3436 2in 375Hex Stealth Wheel REV3.PDF

    am-3155 2in 500Hex Stealth Wheel REV3.PDF

    am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

    am-2648 4IN 8mm Stealth Wheel REV5.PDF

    am-3435 4in 375Hex Stealth Wheel REV3.PDF

    am-2647 4in 500Hex Stealth Wheel REV3.PDF

    CAD File(s)

    am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

    am-3156 2IN 8mm Stealth Wheel.STEP

    am-3436 2IN 375Hex Stealth Wheel REV2.STEP

    am-3155 2IN 500Hex Stealth Wheel REV2.STEP

    am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

    am-2647 4inWheel 500 Hex REV2.STEP

    am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

    am-2648 4inWheel 8mm Hub REV2.STEP

    # Pièce: am-3664_blue
    $9.00
    Disponibilité: En stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    Motor Mount Plate

    #76140
    $9.02
    (1037 En stock)

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

     

    Maverick 12V DC Gear Motor w/Encoder

    #75001
    $39.00
    (813 En stock)

    Our improved and  stronger 12-volt DC motor with 100 rpm and 708 oz-in. of torque. The motor features a built-in, high-resolution Hall effect encoder for precise motor control and comes with an encoder cable.

     

    A 61:1 gearbox comes standard.

     

    Motor Specs

     

    Function

    Min

    Nom

    Max

    Input Voltage

    12VDC

    Gear Ratio

    1:61

    No Load RPM

    88

    100

    112

    No Load Current

    600mA

    Rated Speed

    68

    80

    92

    Rated Current

    2.2A

    Rated Torque

    139oz-in

    Stall Current

    11A

    Stall Torque

    708oz-in

    Direction

    CW

    Encoder Voltage

    4

    5

    Encoder Current

    6mA

    Encoder CPR

    6

     

    Output Counts per Revolution of Output Shaft (cpr) 1,464 pulses

     

    This motor is not FTC Compeition Legal

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $31.99
    (659 En stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    Omni Wheel (100mm, Double Plastic, w/ integrated 6mm Hub)

    #76260
    $41.66
    (854 En stock)

    The 100mm (4 inch)  Double Plastic Omni Wheel provides rotational and sideways 360° maneuverability.  Great for omni directional movement and rotation, easy direction control and tracking, and for fast turning,

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  16mm
    • Hub:    6mm (included)
    • Number of plate:  2
    • Number of roller: 18
    • Body material:    Nylon
    • Roller material:   Rubber
    • Roller diameter:  19mm
    • Net weight:          275g
    • Load capacity:    20kg
    • Step File

    100mm Drive Wheel - 50A - 25mm wide - 1/2" Inner Hex - Blue

    #76262
    $15.27
    (759 En stock)

    The 100mm (4") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft of use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.068kg
    • Step File

    FIRST Expansion Hub Cable Conversion Pack

    #45066
    $28.50

    This pack of eight cables enables direct connection of the TETRIX® MAX TorqueNADO® Motor to the FIRST®-approved control or expansion hub.