Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    35 Series Symmetrical Hub Sprockets 500Hex, 18 Tooth

    11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!

     

    These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.

     

    Specifications

    • Bolt Circle: 0.206 in. diameter holes on a 1.875 in. diameter circle
    • Chain Series: 35
    • Inside Diameter: 1.1245 in.
    • Material: 6061 Aluminum
    • Thickness: 0.168 in.
    # Pièce: am-4791
    $24.00
    Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    2" Compliant Wheel, 1/2 inch Hex, 60 Durometer Black

    #am-3462_black
    $8.00

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    1/2 in. Hex ID Sealed Bearing (R82RS-Hex)

    #am-4703
    $12.00
    (24 En stock)

    This is a 1/2 in. hex bore bearing that is shielded. This Ball Bearing is a great way to make things spin fast!

    #35 Connecting Link for Roller Chain

    #am-0368
    $1.75
    (En stock)

    #35 Connecting Link (Master Link) 

    Specifications:

    • Material: Steel
    • Style: Roller Chain - Spring Clip
    • Type: Connecting Link
    • Size: #35
    • Pitch: 0.375 inch
    • Weight: 0.01 lbs

    35 Series Symmetrical Hub Sprockets 500Hex, 14 Tooth

    #am-4790
    $23.00
    (0 En stock)

    11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!

     

    These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.

     

    Specifications

    • Bolt Circle: 0.206 in. diameter holes on a 1.875 in. diameter circle
    • Chain Series: 35
    • Inside Diameter: 1.1245 in.
    • Material: 6061 Aluminum
    • Thickness: 0.168 in.

    0.50 in. Hex and Keyed Shaft Coupling

    #AM-1560
    $18.45
    (En stock)

    Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!

    Shaft Compatability

    This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.

    PG Series Gearbox 516:1 with Motor Installed (1/2 Hex Shaft)

    #am-4250
    $139.00

    The Planetary Gearbox (PG) series of gearboxes and gearmotors feature robust planetary gearing inside paired with reliable motors. You asked for it, we delivered. This gearbox now features two hex output shaft options to easily attach to 3/8 in. or 1/2 in. hex bore wheels, sprockets, and other motion products without the need for adapters.