Panier

filtres

Menu personnel

préférences

Rechercher

Précédent384mm U-Channel

Suivant416MM Channel

384mm x 40m Flat Bracket

Soyez le premier a tester ce produit

The Studica Flat Bracket is a very strong 3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Width - 40mm
Length - 384mm
Hole Pattern - 8
Step File

# Pièce: 76059

$14.57

Disponibilité: 580 en stock

Quantité:

Commentaires

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

6mm D Shaft Collar Clamp 2 Piece

#76293

$5.47

(892 En stock)

PRE-ORDER Only shipping January 2023

Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6

PWM cable, 24 in.

#am-0694

$5.50

(En stock)

This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like all other PWM cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.

Specifications

Gauge: 22 AWG
Length: 24 in.
Weight: 0.036 lbs
Wire Colors: white, red, black
Wire Jacketing: black heat shrink tubing

432mm Low Profile U-Channel

#76025

$18.04

(618 En stock)

The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Height - 14mm
Width - 48mm
Length - 432mm
Hole pattern - 9
Step File

48mm Flat Beam

#76048

$2.07

(1019 En stock)

The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Width - 8mm
Length - 48mm
Step File

Bronze Bushing 6mm ID x 14mm OD (12 pack)

#76301-12

$31.94

(1155 En stock)

The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

Material: bronze
Inside Diameter: 6 mm
Outside Diameter: 14 mm

Step File

Short Lever Limit Switch with Terminals (4 pack)

#72060

$13.88

(1050 En stock)

This is a snap-action micro switch with hinged roller lever and terminals for easy wire connection.

Features:

High precision of action seat
High shock resistance
Shock resistance Max.l000/s2
Max temperature: T105.C
Catheter design for easy wiring
3 Pin
Max. Current: 16A
Max. Voltage: 250V
OP:14.3~15.1mm
Protection Level: IP40
Switch Function: ON - (OFF), OFF - (ON)
Contact form: SPDT
High impact resisstance
Max Ambient temperature:105centigrade
Mechanical life:10,000,000 on -off
Electrical life: over 100,000 on-off
Contact material: AgNi ,AgCdO
Certificate: CCC,CE,UL,ROHS
Step File

#25 - 40 Tooth Sprocket

#76228

$13.18

(1041 En stock)

Specifications:

Material: 6061-T6 Aluminum
Number of teeth: 40
Step File

240mm Square Beam

#76104

$9.71

(582 En stock)

The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material - Anodized 6061-T6 Aluminum
Holes - 3.5mm diameter spaced 8mm apart
Length - 240mm
Step File

25mm Standoff (12 pack)

#76182-12

$12.49

(533 En stock)

Step File

Les clients ayant acheté cet article ont également acheté

6mm D Shaft Collar Clamp 2 Piece

#76293

$5.47

(892 En stock)

PRE-ORDER Only shipping January 2023

Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6

PWM cable, 24 in.

#am-0694

$5.50

(En stock)

Specifications

Gauge: 22 AWG
Length: 24 in.
Weight: 0.036 lbs
Wire Colors: white, red, black
Wire Jacketing: black heat shrink tubing

432mm Low Profile U-Channel

#76025

$18.04

(618 En stock)

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Height - 14mm
Width - 48mm
Length - 432mm
Hole pattern - 9
Step File

48mm Flat Beam

#76048

$2.07

(1019 En stock)

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Width - 8mm
Length - 48mm
Step File

Bronze Bushing 6mm ID x 14mm OD (12 pack)

#76301-12

$31.94

(1155 En stock)

The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

Material: bronze
Inside Diameter: 6 mm
Outside Diameter: 14 mm