4 Gauge Wire - 10 ft, Black

Machine Key, steel. Used in 2.5" CIM Motor shafts. 

Specifications:

• Width: 2mm (0.078 inch)
• Length: 10mm (0.394 inch)
• Weight: 0.0008 pounds

The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 3 in. and 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

This is a single sheet of 1/8 inch thick polycarbonate (PC) plastic, cut to a 24x24 inch square. This single sheet of PC will be shipped with the protective covering on both sides of the plastic sheet. 

Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon).

This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.

Specifications:

• Weight: 2.9 pounds
• Width: 24 inches
• Length: 24 inches
• Material thickness: 0.118 inch
• Material: Clear Polycarbonate

This Ethernet Panel Mount Extension Cable can be used to connect to the robo-RIO on FRC robots and provide easy to access plugs. If your robot is designed so that the robo-RIO is buried, you can use this handy cord to deploy and debug code.

Specifications

• Connectors: RJ45 Male, RJ45 Female
• Length: 13 in.
• Manufacturer: Adafruit Industries
• Manufacturer Part #: 909
• Weight: 1.28 lbs

Four Gauge wire can be used for main power between your batteries, main breaker and power distribution on your FRC Robots. The thinner 6 gauge wire has been common for some time in competition robotics wiring, however, with this larger 4 gauge wire you can prolong breaker life thanks to lower resistance, larger, and more flexible wire. 

Specifications

• Color: Black, Red
• Conductor Diameter: 0.20 in.
• Current: 150A
• Diameter: 0.35 in.
• Gauge: 4
• Insulation: Flexible EPDM
• Insulation Thickness: 0.06 in.
• Length: 10 Feet
• Stranding: 370

iCrimp Cable Lug Crimping Tool for Heavy Duty Wire Lugs,Battery Terminal,Copper Lugs AWG 8-1/0

•  6 dies in AWG: 8,6,4,2,1,1/0
•  Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.
•  Comfortable grip with antislip surface saves strength and improves user’s experience.
•  Made of high quality carbon steel which can offer long service life.
• Compatiable with copper&aluminum cable lug,non-welding and standard electrical connection.

This is a kit of loose Anderson Power Products (APP) Powerpole (model PP45) connector hardware, aimed at providing a robot builder some tools to make dis-connectable cables and wires. This kit contains 100 Red Housings, 100 Black Housings and 200 Contacts.

This kit provides the connecting hardware needed to make 100 Ground/12V pairs that are easily removable.

The contacts are rated for 45 amps, and sized for 10-12 gauge wire. Use this Powerpole Crimper for good connection.

Included Hardware:

• One Hundred- Red APP single-connector Powerpole housings (APP #: 1327)
• One Hundred- Black APP single-connector Powerpole housings (APP #: 1327G6)
• Two Hundred - Contacts (APP #: 261G2-LPBK)
• Overall weight - 0.88 lbs.

F6's unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.) The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses.