57 Sport 550 Motor Mounting Kit (am-3767)

This retainer clip is used to hold objects (such as gears) in place on shafts. 

Example: This product can be used to hold a gear onto a CIM motor shaft. 

Specification: 

• Material: Steel
• Inner Diameter: 8mm
• Outer Diameter: 15mm
• Weight: Less than 0.001 lbs

This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. 

Product Overview:

• Inner Diameter: for 6mm D Shaft
• Outer Diameter: 0.437 in.
• Weight: 0.0005 Pounds

This external retaining ring is used to fit into a groove on a 3/4" shaft. 

External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. 

Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore.

Specification: 

• Material: Steel
• For Shaft Diameter: 3/4"
• Specification: ASME B18.27.1
• Thickness: 0.042"
• Type: External Retaining Ring
• Free Inside Diameter: 0.693"
• Lug Height: 0.136"
• Section Width Maximum/Minimum: 0.092/0.051"
• Groove Diameter: 0.704"
• Groove Width: 0.046"
• Groove Depth: 0.023"
• Plier Hole Diameter: 0.052"
• Weight: 0.002 pound

Specifications:

• Material: Steel with Black Phosphate Coating
• Thickness: 0.035 inch
• Free Inside Diameter: 0.300"
• Free Outside Diameter: 0.660"
• Groove Depth: 0.036"
• Groove Diameter: 0.303"
• Groove Width: 0.039"
• Shaft Diameter: 3/8"

3/16" x 3/4" spring pin. Used in the WormBox gearbox.

Specifications:

• Material: spring steel
• Diameter: 3/16"
• Length: 3/4"
• Weight: 0.001 pounds

1/2 inch external retaining ring, used in the RAW Box. 

Specifications: 

• Material: Steel
• For Shaft Diameter: 1/2"
• Thickness: 0.031"
• Type: External Retaining Ring
• Free Inside Diameter: 0.456"
• Plier Hole Diameter: 0.40"
• Weight: 0.002 pounds

This retainer clip is used to hold objects (such as gears) in place on shafts. 

Example: This product can be used to hold a gear onto a PG71 motor shaft. 

Specification: 

• Material: Steel
• Inner Diameter: 3/8"
• Outer Diameter: 0.64"
• Weight: Less than 0.001 lbs

Machine Key, steel. Used in 2.5" CIM Motor shafts. 

Specifications:

• Width: 2mm (0.078 inch)
• Length: 10mm (0.394 inch)
• Weight: 0.0008 pounds

#25 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #25
• Pitch: 0.250 inch
• Weight: 0.01 lbs

#35 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs