Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    574 ml Air Reservoir with Push Connect Fittings

    This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

    This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

    Specifications:

    • Manufacturer: Clippard
    • Weight: 0.64 lbs
    • Capacity: 574 ml (35 cu. inch)
    • Ports: Two 1/4" od tube push-in fittings
    • Maximum pressure: 125 psig
    • Temperature rating: 35 to 100 F
    • Length: 12.25"
    • Diameter: 2.5" (@ main tank), 2.75" max


    A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

    Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).

    # Pièce: am-2649
    $30.00
    Disponibilité: 20 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    42mm Hinge with Bearings

    #76312
    $10.40
    (3898 En stock)

    Made from aluminum and anodized in blue, the Studica 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws. 

    • Material: 6063 Aluminum
    • Length: 42mm
    • Width: 30.88mm
    • Thickness: 3.5mm
    • Hole diameter: 3.2MM
    • Step file

    Pneumatic Reservoir Bracket

    #am-2008
    $4.50
    (En stock)

    This is a plastic bracket for mounting the Clippard Air Tank (am-2649).

    If you plan to use this bracket to hold of these am-2649 tanks, we recommend using two brackets for each tank. 

    Specifications:

    • Weight: 0.066 pound
    • Width: 3.14 inches
    • Height: 2.65 inches
    • Thickness: 0.75 inch
    • Material: Plastic

    For Pro Charging Systems, warranty replacements contact Richard Harmon. 

    0.5 in. Hex Hub

    #am-2568
    $15.38
    (23 En stock)

    This is the "500EX Hex Hub" the bore is a 1/2" Hex Hole. It is a slightly different version of the 500 Hex Hub. It is manufactured differently, as it is extruded. Also, there is a 1.124" diameter boss on each side of the hub flange, providing a location for 1.125" bore flat sprockets. Are you having a hard time keeping your sprocket concentric with your hub? This hub is the trick.

    This is the hub featured in the 2014 and 2015 Kit of Parts Drive Chassis and fits all AndyMark wheels. 

    Specifications:

    • Material: 6063 Aluminum
    • Bore: 1/2" Hex
    • Bolt Pattern: 0.204" diameter holes, evenly spaced on a 1.875" diameter bolt circle
    • Outside diameter: 2.25"
    • Weight: .088

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 En stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $14.50
    (43 En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    Tetrix Max DC Motor Mount

    #39376
    $27.95

    TETRIX MAX DC Motor Mount has an increased number of attachment holes, making this two-piece DC motor mount more flexible. Mount a motor between or alongside channels, as well as on top of them.

    • Material: 7005 Aluminum