Panier

filtres

Menu personnel

préférences

Rechercher

Précédent50 pack of assorted Shrink ...

Suivant6 Gauge Compression Lug Con...

6 Gauge 12 Inch Battery Cable - Stiff PVC Insulation

Soyez le premier a tester ce produit

Tip-to-tip length is approximately 12.6 inches.

# Pièce: am-0009

$26.50

Disponibilité: 6 en stock

Quantité:

Aperçu
Commentaires

Want it longer or shorter? We offer this cable in custom lengths! Both end connectors are crimped with a 6-ton pneumatic crimping tool. One end has connections to attach to the battery and the other has an SB50 Anderson Connector. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Which do you prefer a stiff cable or a flexible cable? No matter your choice we have the best option in either camp. PVC insulated cables create a stiff wire route maintaining shape for repeatable connections. EPDM jacketed cables cand bend and twist to accommodate tight spaces and small places.

Specifications

Connector : SB50, 1/4 in. Ring Terminal
Gauge: 6
Insulation: PVC or EPDM
Operating Temperature: 257°F to -59°F
Stranding: 263 inside EPDM Jacketed Wire
Voltage: 60V Max
Wire Type: Stranded

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

#10-32 x 1.5" SHCS - Min 25

#am-1014

$0.38

(En stock)

Statistics:

Material: Steel
Coating: Zinc plated
Thread: #10-32
Length: 1-1/2 inch
Head: Socket Head Cap Screw

1/4-20 x 0.5" BHCS - Min 25

#am-1039

$0.50

(800 En stock)

Specifications:

Material: Steel
Coating: Zinc plated
Thread: 1/4-20
Length: 1/2"
Head: Button Head Cap Screw

10-32 Nylock Jam Nut

#am-1063

$0.11

(325 En stock)

Must be ordered in mulitples of 25

10-32 Nylock Nut

#am-1042

$0.08

(En stock)

This item can only be purchased in multiples of 25

Specifications:

Material: Steel
Coating: Zinc Plated
Thread: #10-32
Thickness: 0.249"
Thread: Fine
Thread Size: 32
Type: Nylon Insert Lock Nut
Wrench Size: 3/8"

1/4-20 Nylock Nut

#am-1015

$0.11

(500 En stock)

Specifications:

Material: Steel
Coating: Zinc plated
Thread: 1/4-20
Width across hex: 7/16"

10-32 x 0.375 in. Socket Head Cap Screw

#am-1359

$0.30

(250 En stock)

This item can only be purchased in multiples of 25

Specifications

Drive: 5/32 in. Hex
Finish: Zinc
Head: Socket Cap
Length: 0.375 in.
Material: Alloy Steel
Thread: 10-32 Fine
Weight: 0.005 lbs

6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

#am-0805

$5.50

(255 En stock)

This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

Specifications

Gauge: 06 AWG
Hole Size For Stud: 0.25 in.
Material: Copper
Overall Length: 2.03 in.
Tongue Width: 0.48 in.
Weight: 0.01 lbs
Wire Strip Length: 1.18 in.

Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

#am-2986

$8.00

(87 En stock)

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

Inside diameter: 0.500-0.502 inch hex bore
Outside diameter: 1.125 inch
Flange thickness: 0.062 inch
Overall thickness: 0.312 inch
Weight: 0.05 pound

2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

#am-3462_green

$8.00

(72 En stock)

Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

Compliant Wheel Sizing

Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.