Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    6 in. TalonGrip™ Vise Jaw - Mitee-Bite Part Number 32065 - Compatible with Tormach 4 in. and 5 in. vices

    6 in. Talongrip™ Steel Vise Jaw Set, compatible with 4 in and 5 in. vises

    # Pièce: 51253
    $249.00

    COMPATIBLE WITH TORMACH 4in. and 5 in. VICES

    STEEL VISE JAW SET

    Part Number 32165
    Vise (metric) 4 in. /6 in. (100mm/150mm)
    A (metric) 6.0 in. (150 mm)
    B (metric) 1.88 in. (47.75 mm)
    C (metric) 1.0 in. (25.4 mm)
    D (metric) 2.5 in. / 3.125 in. (63.5 mm/ 79.375 mm)
    E (metric) .688 in. / .8 in. (17.47 mm / 20.32 mm)

     

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    COMPATIBLE WITH TORMACH 4in. and 5 in. VICES

    STEEL VISE JAW SET

    Part Number 32165
    Vise (metric) 4 in. /6 in. (100mm/150mm)
    A (metric) 6.0 in. (150 mm)
    B (metric) 1.88 in. (47.75 mm)
    C (metric) 1.0 in. (25.4 mm)
    D (metric) 2.5 in. / 3.125 in. (63.5 mm/ 79.375 mm)
    E (metric) .688 in. / .8 in. (17.47 mm / 20.32 mm)

     

    Les clients ayant acheté cet article ont également acheté

    TTS - 1/2 in. Set Screw Holder.

    #31821
    $37.95

    TTS - 1/2 in. Set Screw Holder.

    TTS ER Collet Holder ER32

    #33266
    $83.95
    (2 En stock)

    TTS Toolholder for ER32 Collets.

    1/4 in. -90° Drills

    #33479
    $8.95

    YG1 90° Cobalt Steel Spot Drills: 1/4 in.-90°

    TTS - 1/4 in. Set Screw Holder

    #31818
    $37.95

    TTS - 1/4 in. Set Screw Holder.

    Digital Micrometer (0-1 in.)

    #35512
    $90.00

    Calibrated micrometer measures 0 to 1" (0 to 25mm) with 0.00005" (0.001mm) resolution and +/- 0.00005" accuracy, for taking outside diameter measurements in harsh workshop conditions.

    • Inch and Metric Display
    • Data Port
    • Ratcheting Thimble
    • Steel Frame with Enamel Finish
    • Lapped Carbide Measuring Faces
    • Measuring Range: 0-1 in. (0-26 mm)
    • Resolution: .00005 in. (.001 mm)
    • Accuracy +/- .0001 in. (+/- .002mm)
    • Repeatability .0005 in. (.001mm)

    Lyndex TTS™ Adapter Collet: R8

    #50568
    $61.50

    The TTS-R8 Adaptor Collet is an R8 collet with modified length that allows for mounting of all TTS tool holders in R8 taper spindles